Strom & Sanitäreinrichtung - Seite 324

stainless steel kitchen sink with taphole, for inset 480x340x145 mm with basket strainer waste

Ifö 99494 WC-Zubehör

Kriss Cera/Sign WC-Sitz universal weiß.

Duschthermostat mit Hitzeschutz und Wasserflussbegrenzer (3/4 Zoll) Rücklauf

Ifo Spira Classic set wall-hung toilet, Rimfree, with toilet seat: T=49.5cm, Soft close=Yes, Quick-Release hinge=Lockable, Fixing=From above, White / Ifo Clean. Wall-hung. WC bowl without flushing rim with Rimfree flushing technology. Type 1, full flush 4 l, in accordance with EN 997. Horizontal outlet. For concealed cisterns.

Eurosmart Cosmopolitan Tub/shower mixer with 400 mm spout, Chrome

The Wiser Door/Window sensor provides status to your Wiser system regarding open or closed windows and doors. Configuration is made possible by connecting the sensor to the Wiser Gateway with your Wiser app. The Door/Window sensor can be used on access doors to provide you a push message when the door is opened. This provides families with children an opportunity to receive a message when the child has safely arrived at home from school. Or the sensor can be used to control a light also connected to the system so that the light turns on when the door is opened after the sun has set. At low power you will be notified on your Wiser app. The device is powered by a CR2450 battery.

Pressalit T2 ist ein Multifit-Sitz, der für die meisten Keramiken geeignet ist. Das Modell verfügt über universelle Edelstahl-Scharniere.

Abfall- und Überlaufgarnitur mit Stopfen

The Wiser wireless Temperature & Humidity combines two sensors within one device. The sensor provides feedback directly to the Wiser Gateway regarding the surrounding temperature and humidity levels from where the sensor is installed. The sensor provides what is needed to maintain a nice indoor climate or trigger automations based on temperature or humidity level. It is powered by CR2450 battery.

Table stand for the Wiser Gateway that is easy to install and can be placed as desired. Are available in the dimensions 86 x 54,6 x 86 mm (H x W x D).

Pressalit Sign passt für die Ifo Sign Keramik und das Modell hat Soft Close und feste Edelstahl-Scharniere.

Pressalit Cera+ passt für die Ifo Cera Keramik. Das Modell hat Soft Close und Edelstahl-Scharniere.

Pressalit Sway D White with soft close and lift-off

· 1 outlet · thermostat cartridge, ceramic valve 180° · safety lock at 40° C · temperature limitation adjustable · flow rate hand shower connection at 0.3 MPa: 17 l/min · operating pressure: min. 0.1 MPa / max. 1.0 MPa · Ecostop button limits the water consumption to 10 l/min · scope of supply: without S-connetions and escutcheons · non-return valve · dirt filter included · centre distance: 150 ± 12 mm · connection dimension: DN15

Sieb-Abfall A6 und Überlaufanordnung

Rapid SLXElement for WC, 1.13 m installation height with integrated socket and shower toilet connectionwith flushing cistern GD 2with integrated socket for shower toilets (power)ready for shower toilets (water)small revision shaft for small flush platesfor on-the-wall installations or studded wallspowder coated steel frame, self-supportingfor dry-cladding, completely pre-assembledwithout outlet pipewith fixed connectionsquick adjustment, lockablefixing materialTUV approved2 WC fixing boltsfixing device for ceramicdistance of fixing bolts 180/230 mmoutlet bend Ø 90 mmdepth adjustablereducer Ø 90/110 mminlet and outlet connecting setflushing cistern GD 2, 6 - 9 l, containing following features:adjustment ex factory 6 l and 3 lpneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flushwater supply from right or backlow noise (group I acc. to German Noise Specification)fully insulated against condensation1/2 water supply conn

Rapid SL for WC flushing cistern GD 2with small maintenance access1.14 m installation heightfor on-the-wall installations or studded wallspowder coated steel frame, self-supportingfor dry-claddingwith fixed connectionsquick adjustment, lockablefixing material2 WC fixing boltsfixing device for ceramicdistance of fixing bolts 180/230 mmspacer Ø 80 mmPP outlet bend Ø 80/100 mminlet and outlet connecting setflushing cistern GD 2, 6 - 9 ladjustment ex factory 6 l and 3 lpneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or non-interruptiblewater supply from left/right/back or toplow noise (group I acc. to German Noise Specification)DIN approvedinsulated against condensationangle valve 12water inlet with pipe fixationwith push fit flexible hose unionno tools required for the installation of the inspection shaft incl. protection during construction phase, for vertical useincluding wall plate Skate Airfor dual flush or start & stop a

Vk50 Edelstahl-Utility-Spüle, wandmontiert, mit Kugelhahn 1,25

Danfoss RA-KE Fußbodenheizungsanschluss. Sammelverteiler (Normaldurchfluss, mit oder ohne Voreinstellung) sind universelle Rohrverbinder und Regelventile für Heizkörper. Eine Montage umfasst: Ein Heizkörperventil, ein Verteilerventil, Anschlussrohr und Klemmverschraubung

Danfoss RA-G Ventil. Die Hochleistungsventile vom Typ RA-G werden hauptsächlich in Einrohrsystemen eingesetzt. Alle RA-G Ventile können mit allen thermostatischen Sensoren der RA-Serie kombiniert werden.

SMART HUB SHB-IZ makes it possible to combine the heating control with Nobø panel radiators and underfloor heating in one common app – together with other smart devices in the home.

By connecting the control unit SPC-IZ (for panel radiators) and the thermostat SWT-IZ (for underfloor heating),

you can create weekly programs, automate the heating and contribute to lower energy consumption – without compromising on comfort.

Note:
To use the Futurehome hub and app, an active subscription is required.

The subscription is handled directly by Futurehome, and questions regarding this should be directed to their customer service.

• All in one app
• Reliable - Direct communication with hub
• Boost function for heating
• Optional mode setting

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Produktmerkmale • Versorgungsspannung: 220...240 V • Netzspannung: 198...264 V • Netzfrequenz: 0 Hz, 50 Hz...60 Hz • Lampenstart mit optimalem Vorheizen des Filaments • Lebensdauer:>100.000 h (für T =65°C bei Tc) • Energieeffizienzindex EEI:A2 BAT • Automatische Abschaltung defekter Lampen und am Ende der Lebensdauer (EoL) Sicherheit: nach EN61347-2-3 Lampenbetrieb:nach EN60929 RI-Suppression:nach EN55015:2006+A1:2007+A2 :2009/CISPR15 Netzharmonische:nachEN61000-3-2 Immunität:nachEN61547 Produktnutzen Perfekter Lampenstart für Anwendungen mit Bewegungsmeldern Automatischer Neustart nach dem Austausch der Lampe