PEX-Systeme

Vorteile des Uponor-Rohrs 3/4 2X15 mm mit fester Buchse.

Roth QuickBox-red Wallbox in gunmetal, 15 mm push.

Transition from 15 mm to pipe thread.

Terminationsbox, einschließlich Abschlussbogen aus DR-Messing, weißem Q&E-Ring und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Used for For pipe in 25 mm

Terminationsbox, einschließlich Q&E-Terminierungsbogen aus DR-Messing, weißem Q&E-Ring und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Paar Abschlusskästen inklusive zwei Q&E-Abschlussecken aus DR-Messing mit weißen Q&E-Ringen, Metallmontagehalterung für die Montage c/c 150mm und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Uponor-Schneidwerkzeug für Kupplungsbox M7.

Paar Abschlusskästen inklusive zwei Q&E-Abschlussecken aus PPSU mit weißen Q&E-Ringen, Metallmontagehalterung für die Montage c/c 150mm und Montageschrauben. Für wasserdichte Verbindungen mit PE-Xa-Rohren und Uponor-Kanälen in allen Arten von Wänden gemäß NT VVS 129.

Fitting in gunmetal for Roth manifold

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Messingverteiler mit 3 Auslässen für Wasser- und Heizsysteme.

used for Roth manifold in gunmetal

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Roth manifold in gunmetal for pex pipe

Transition from 18 mm to pipe thread.

Uponor Adapter mit männlichem Gewinde 1" und weiblichem Gewinde 3/4" für Q&E PPM.

Adapterwinkel PPM Uponor 1x3/4.

Uponor Kupplungsbox doppelt M4 15X1/2

Pipe cutter for up to 28 mm

Schiene für PEX wird für PEX-Rohre und Fußbodenheizung vor dem Gießen verwendet. Mitteabstand: 50 mm. Inklusive Trennung und 2 separaten Rohren.

Used for Pex and CU pipe

used for Roth EURO-red manifold

Transition from 18 mm to pipe thread.