Heizungssteuerung

Danfoss AVTA thermostatic water valves. AVTA thermostatic operated water valves are widely used for temperature control in many different sorts of equipment and installations where cooling is required.

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

AMZ 112 is typically used in connection with HVAC applications, domestic and commercial central heating applications, domestic hot water and chilled water applications, solar energy plants, priority control of hot water supply and heating (diverting funct

Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67The coil fits to all Danfoss soleniod valves with armatures system type B = 13,5 mmEG. EV210B, EV220B,EV250B, EV224B,EV222B

Service element for replacement on AVTA and AVTB thermostatic valves.

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

Danfoss AMV 10 actuator. AMV 10/13 are actuators for three point control and AME 10/13 are actuators for modulating control, furthermore AMV(E) 13 actuators have safety function. The spring return actuators can be used to provide safety shut off on power

Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

Tough applications, with IP67, 12W ac / 20W dc, IP67

AB024D Coil 24V DC 5 W 9mm IP00The coil only fits the valve system A with a 9 mm actuator system

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s

Danfoss A/S, 003N0196

Danfoss AVTQ thermostatic valve. Self-acting flow-compensated temperature controller primarily for use in district heating systems with plate heat exchangers for instantaneous hot water production. The controller closes on rising sensor temperature.

Spare part Service kit EV220 20 EPDM 032U1073 from DANFOSS A/S

Sensor Pocket 060L327166 from DANFOSS A/S

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

PRESSURE RELIEF VALVE 031E029866 from DANFOSS A/S

In the KPS series, special attention has been given to meeting important demands for a high level of enclosure, a robust, compact construction and resistance to shock and vibration. The KPS range covers most outdoor as well as indoor application requireme

Danfoss VMV 25 valve. 3-way seated valve used primarily with thermohydraulic actuator ABV for flow temperature control. The valve is available with both internal and external thread.

Danfoss A/S, 003H6904

Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders (e.g. storage tanks) or heat exchangers in radiator heating systems. Combined with RAV it is intended for temperature control in a mixing loop for hot water service. The controller closes on rising temperature.

Danfoss range limiting pins.