Thermal Grizzly CPU Kühler

Flüssigmetall-Kühlpaste, Silberpaste, Dichte: 6,29 g/cm³, Betriebstemperatur: -50 - 200° C, 1 Gramm

Wärmeleitpaste für Prozessorkühler, Silber

Hochleistungs-Wärmeleitpaste mit 14,2 W/m·K, 2-g-Spritze (TG-KE-002-R), nicht elektrisch leitend, optimiert für niedrige Temperaturen (-250 bis +350 °C), inkl. Applikatoren – ideal für CPU/GPU und extremes Overclocking.

Kryonaut Extreme nutzt eine extrem feine Partikelgröße und minimal mögliche Schichtdicke, um die Wärmeübertragung auf ein neues Level zu heben – selbst bei LN2- oder Trockeneis-Setups. Die Rezeptur bleibt auch unter hoher Last formstabil und trocknet nicht aus, zusätzliche nano-Aluminiumoxid-Partikel füllen mikroskopische Unebenheiten zuverlässig. So holst du aus High-End-Kühlern und Wasserkühlungen konstant niedrige Temperaturen heraus.

• Wärmeleitfähigkeit: 14,2 W/m·K für maximale Performance bei Luft- und Wasserkühlung
• Temperaturbereich: ca. −250 bis +350 °C – geeignet von Alltagsbetrieb bis Sub-Zero-OCs
• Sicherheit: elektrisch nicht leitend und nicht korrosiv – minimiert Kurzschlussrisiken
• Konsistenz: hochviskos (≈130–180 Pa·s) für präzises, dünnes Auftragen
• Inhalt & Farbe: 2 g in Spritze, charakteristische „pink“ Paste
• Lieferumfang: 2 Applikatoren, Quick-Start-Guide, Echtheitscode
• Einsatzgebiet: CPU/GPU, Heatsinks, Direct-Die & Bench-Sessions mit LN2/DI

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

CPU-Kontaktrahmen für 13th gen Intel Raptor Lake & 14th gen Raptor Lake-S, kann helfen die Kühlleistung durch besseren Kontakt zwischen CPU und Kühler zu verbessern - bitte sehen Sie sich vor der Installation das Installationsvideo an

Wärmeleitpaste, Hellgrau

Wärmeleitpaste, Hellgrau

Wärmeleitpaste, für Overclocking konzipiert, 14,2 W/m*K Wärmeleitfähigkeit, keine Aushärtung erforderlich, 33.84 Gramm

Applikator für flüssige Wärmeleitpaste (Packung mit 3)

Wärmeleitpaste, hellgrau, Wärmeleitfähigkeit: 12.5 W (mK) 1g

Wärmeleitpaste mit 12,5 W/m·K Leitfähigkeit, Einsatzbereich −250 bis +350 °C, nicht elektrisch leitend, Viskosität 120–170 Pa·s und 1 g Inhalt.

Speziell für anspruchsvolles Overclocking entwickelt liefert die Paste zuverlässige Performance ohne Aushärten und mit langzeitstabiler Konsistenz. Die fein abgestimmte Formel auf Basis von Nano-Aluminium- und Zinkoxid-Partikeln füllt Mikrounebenheiten sauber aus und sorgt für niedrige thermische Übergangswiderstände. Dank präzisem Applikator gelingt eine gleichmäßige, dünne Schicht auf CPU, GPU & Heatsink.

• Leitfähigkeit: 12,5 W/m·K für effiziente Wärmeübertragung.
• Temperaturbereich: −250 bis +350 °C für Kryo-Setups bis Hochlast.
• Viskosität: ca. 120–170 Pa·s – leicht zu verteilen, bleibt formstabil.
• Zusammensetzung: Nano-Aluminium & Zinkoxid, nicht elektrisch leitend.
• Dichte: ~3,7 g/cm³ für dünne, homogene Schichten.
• Handhabung: keine Aushärtung, langzeitstabil; flacher Aufsatz/Spachtel für präzises Auftragen.
• Variante: 1 g Tube, Modell TG-K-001-BS (Kryonaut).

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity
• High compressibility
• Easy to use
• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.
• Minus Pad Advance: Improved thermal conductivity, higher compressibility.
• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Der AM5 High Performance Heatspreader ist ein Upgrade für die Ryzen 7000 CPUs von AMD. Die diamantgefräste Präzisionsoberfläche des Heatspreaders aus vernickeltem Kupfer bietet eine 240% größere Oberfläche. Dadurch ermöglicht der AM5 Heatspreader die maximale Wärmeabfuhr bei Luft- und Wasserkühlern.

Kapton Insulation Sheet is a polyamide film that can be used at high temperatures up to 280 degrees Celsius and acts as an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for covering components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet.

Brief Informations:

• 50 adhesive strips 10x60mm
• Thickness of 40µm
• Electrically insulating
• Max Temp: 280°C
• Breakdown voltage: Over 1 kV
• Clean the adhesive surface beforehand!

Scope of delivery

• 10x carrier foil with  5 Kapton Insulation Sheets each
   

Thermo-Pad, Red Brown

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

Thermo-Pad, Red Brown

Aeronaut thermal grease is the ideal beginner's product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.

• very good thermal conductivity
• long-term durability
• no curing
• no electrical conductivity

Wärmeleitpaste, Grau

Thermo-Pad, Red Brown