Thermal Grizzly Putty Basic 30 g - Kühlpaste
Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.
The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.
- Electrically non-conductive alternative to conventional thermal pads
- Compensates gaps from 0.2–3.0 mm
- Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity
- Includes three spatulas for application
- Operating temperature range −40°C to +120°C
- Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die
- Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)
Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.
TG Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it ideal as a replacement for thermal pads on GPUs. Graphics cards typically feature several types of thermal pads of varying thicknesses from the factory, requiring different pads during replacement or when converting the cooler to a GPU water cooler.
TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for broad application, while by hand, it can be shaped into small pellets tailored to the surface size (e.g., VRAM, SMD). TG Putty can fill height differences ranging from 0.2 to 3.0 mm.
TG Putty is available in three variants, primarily differing in their thermal conductivity:
- TG Putty Basic: Medium thermal conductivity
- TG Putty Advance: Good thermal conductivity
- TG Putty Pro: Excellent thermal conductivity
For modifying a single, smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as a GeForce RTX 4090, one 30-gram container is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the backside, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.
Notes:
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU die!
Before application, the target surface should be thoroughly cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropanol.
Scope of Delivery
- Thermal Putty Advanced
- 3x Spatulas
Gehäusezubehör
-
DUTZO Air Duster Turbo
Auf Lager. 2-4 Werktage Lieferzeit39,90 €Normalpreis 64,90 € -
DUTZO Air Duster & Vacuum cleaner 2-in-1 - 3 speed
Auf Lager. 2-4 Werktage Lieferzeit44,90 €Normalpreis 74,90 € -
DUTZO Air Duster - 1 speed
Auf Lager. 2-4 Werktage Lieferzeit24,90 €Normalpreis 39,90 €
-
DUTZO Air Duster Pro - 3 speed
Auf Lager. 2-4 Werktage Lieferzeit39,90 €Normalpreis 64,90 €
CPU Kühler
-
dezen Thermal Compound 4.63 W - 2 g - Kühlpaste
Auf Lager. 2-4 Werktage Lieferzeit2,90 €Normalpreis 4,99 €
Merkmale
Gewicht und Abmessungen
Verpackungsdaten
Die genannten Informationen und Spezifikationen können vom Hersteller jederzeit und ohne vorherige Ankündigung geändert werden. Die Herstellerabbildungen dienen ausschließlich der Veranschaulichung. Irrtümer und Schreibfehler bleiben vorbehalten. Deutsche Bedienungsanleitungen sind in einigen Fällen ausschließlich digital verfügbar und nicht Bestandteil des Lieferumfangs. Teile des Textes wurden möglicherweise automatisiert erstellt oder maschinell übersetzt und können daher in Einzelfällen missverständlich sein.