Komponenten für Schaltkästen und Schränke - Seite 39

HF4B 300/5A KL 0.5/1/3 7.5 /10 /15VA Stromwandler Produktbeschreibung: HF4B 300/5A KL 0,5/1/3 7,5 /10 /15VA Stromwandler. IEC 61869-2, CE gekennzeichnet, Kema-Keur zugelassen, UL94 V-0 bewertet. Anwendung: Anzeige-/Betriebszwecke.

HF3B 200/5A KL 0.5/1/3 1 /2.5 /3VA Stromwandler Produktbeschreibung: HF3B 200/5A KL 0,5/1/3 1 /2,5 /3VA Stromwandler. IEC 61869-2, CE gekennzeichnet, Kema-Keur zugelassen, UL94 V-0 bewertet. Anwendung: Display.

HF4B 400/5A KL 0.5/1/3 7.5 /10 /15VA Stromwandler Produktbeschreibung: HF4B 400/5A KL 0,5/1/3 7,5 /10 /15VA Stromwandler. IEC 61869-2, CE gekennzeichnet, Kema-Keur zugelassen, UL94 V-0 bewertet. Anwendung: Anzeige-/Betriebszwecke.

TeSys LE - enclosure for DOL starter with circuit breaker

iRTB relay - delays de energizing a load upon closing 1C/O - Uc 24-240 VAC/24 VDC

Kombi-Sammelschiene 3-polig + Neutralleiter 80A, 10 Module à 18mm, iID FI-Schutzschalter und iC60 Leitungsschutzschalter N,L1,L2,L3/N,L1,N,L2,N,L3......., RAL7016 230V/400VAC

Überspannungsschutz-Hilfsgerät iACTp 220...240 V AC

iC60N - miniature circuit breaker - 1P + N - 25A - C curve

IEC / EN 60947-2 und IEC / EN 60898-1Gemäß den oben genannten Standards kombinieren Leitungsschutzschalter folgende Funktionen:- Schutz des Stromkreises gegen Kurzschlussströme- Schutz des Stromkreises gegen Überlastströme- geeignet für die Isolation

Schneider Electric LP2K0910BD Hilfskontakt

TeSys D Thermische Überlastrelais - 0,16...0,25 A - Klasse 10A

TeSys LE - Gehäuse für DOL-Starter - mit 2 Druckknöpfen

TeSys LE - enclosure for DOL starter - with 2 pushbuttons

Schneider Electric A9F04713 Stromunterbrecher 3

MCB 3P+N 6KA C-63A 4M

RCBO 1P+N 6kA C-13A 30mA A Technische Daten: Auslösekurve: C Pole: 2 Pole Nennlast (In): 13 A Nennspannung (Un): 230V +10% / -15% Nennausgangsstrom (Idn): 30mA Empfindlichkeitsklasse A Frequenz:50Hz Bewerteter Durchbruch:6kA in h.t. EN61009-1 IP-Schutzart :IP2x montiert im Gehäuse Temperatur :30°C in h.t. EN61009-1 Verschmutzungsgrad :2 in h.t. EN61009-1

Schneider Electric C60SP Stromunterbrecher 2P

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 1P+N circuit-breaker with 1 protected pole and 6A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables with a cable clamping capacity of 1mm2 to 16mm2. The connection allows flexible or with ferrule copper cables with a cable clamping capacity of 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage of 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 81mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 110g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The heat dissipation is 1.4W. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The IP degree of protection is IP20 and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to +60°C. The storage temperature is from -40°C to +60°C.

TeSys D Umkehrschütz - 3P(3 NO) - AC-3 - <= 440 V 9 A - Spule mit 24 V AC

Lock case for automatic fuse PSL-CB from PANDUIT GmbH

Schneider Electric RSB1A120BD Nicht kategorisiert

Schneider Electric A9F04620 Stromunterbrecher 1

Grafikkarten, Quadro, 64 MB SDRAM, AGP 4x, retail

TeSys LE - enclosure for DOL starter - with pushbutton

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A160P7PV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160P7PV is 230 VAC and average coil co