Komponenten für Schaltkästen und Schränke - Seite 62

Humfree contactor 25A 4NO 230V Humfree for the control of circuitsGuarenteed silence during the entire life of the productCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Stromzähler, 3-Phasen, aktive Energie Kl. 1 & B, zugelassen nach: IEC 62052-11, IEC 62053-21, EN 50470-1, EN 50470-3

Latching relay 2NO 8V1 moduleRated operational voltage: 250VType of contacts: 2NOScrew connectionFrequency: 50/60Hz

Set of 4 connectors 100A monoconnect

Siemens SITOP PSE200U/4X3-10A/SMK

Siemens LS-SCHALTER 10KA 1POL C2

Schneider Electric RSB2A080JD Nicht kategorisiert

Siemens LEISTUNGSSCHALTER SCHRAUBANSCHL. 0,5A

Siemens LS-SCHALTER 10KA 1POL C4

Schneider Electric RXG22P7 Nicht kategorisiert

Siemens 3RV20111GA15 Stromunterbrecher Motorschutzschalter 3P

Siemens ZEITZAEHLER 48X48MM AC230V 60HZ

Siemens 5SL6306-7 Nicht kategorisiert

NH1GG50V125

Schneider Electric LC1D18V7 Hilfskontakt

Schneider Electric LC1D32B7 Hilfskontakt

Contactor 25A 2NO 24V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 6A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Safety transformer 60VA 12-24V 4M

Buzzer 220/240V 1M

TeSys GV2 & GV3 - Hilfskontaktblock - 1 Öffner + 1 Schließer

Acti9 iPB 1NO single push button grey

Latching relay 4NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 48VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

iC60N - Leitungsschutzschalter - 1P - 0,5A - C-Kurve

Wählschaltergriff. Anzeige I-O und AN-AUS. Keine separate Welle erforderlich. Mit max. 3 Vorhängeschlössern abschließbar, IP 65, Lochabstand 36/48 mm, NEMA 1, 3R, 12, schwarz, OT16...125FT