Komponenten für Schaltkästen und Schränke - Seite 38

Residual current fault current protective device RCD 3P + N, 40A, 400V, 30mA, Class A with N-terminal at the right side. Multi 9 residual current RCD (RCCB) protects people against electric shock by direct and indirect contact. In addition they protect installations against fire caused by the transition of the electric installations. This class A residual current circuit breaker is 3P + N pole, marked to 40A at 400V and has a sensitivity of 30 mA. The unit is equipped with test button on the front, 72 mm wide and suitable for mounting on DIN rail.

The Siemens 5SU1346-7FP32 personal protection circuit breaker combines a residual current circuit breaker and a circuit breaker to protect against overcurrent, overheating and electrical faults that can cause personal injury. It has a rated current of 32A with C characteristic, a breaking capacity of 6kA and a residual current of 30mA. The product is 3-pole + N, with a rated voltage of 400V AC and an enclosure class of IP20 for increased safety. It is also equipped with protection against false tripping and an interlock function, ensuring reliable operation under all conditions.

Spannungswandler - 230..400 V - 1 x 24 V - 100 VA

Interpact circuitbreaker 4P

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

short terminal shield - 4 poles - 0<630

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected pole and 20A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 400VAC. It is DIN rail mountable. The width in 9mm pitches is 10. The product color is white (RAL9003). The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The weight is 500g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected poles and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 10. The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The product colour is white (RAL 9003). The product weight is 500g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mo

Schneider Electric Linergy DX Elektrische Abdeckung

[7825990220]

iID - earth leakage protection - 4P - 40A - 300mA - A type

Überstromschalter, 10A, 3polig+N, Typ C Charakteristik

This Acti9 product is a hybrid horizontal comb busbar 12 modules for bottom connection. It is dedicated to 3L+N installations. The type is NL1L2L3 (Line). It is a set of 1 device. It is suitable for 4 devices (3P+N). The length is 218mm.The total number of modules of 18mm is 12. The distance between each way is 54mm. The Ie rated operational current at 40°C is 80A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 440VAC. The Ue rated operational voltage is 230VAC phase to neutral. The color of the device is white (RAL9003). The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with EN/IEC 60439-1 standard.

QA 200N1 circuit breaker without operating devices. Product description:

Schnittstellen-Plug-in-Relais - Zelio RSB - 1 Wechslerkontakt - 12 V DC - 12 A

Zelio RUM relays are available with either 2 or 3 changeover contacts capable up to 10A each. Depending of model, RUM is available with up to 10 different supply voltages which will cover your every need.Zelio RUM relays is available for 2 different socke

Zero separation piece 200A box 1 Product description:

spreader set - 52.5 mm pitch - flat connection - 3 poles

Überstromschalter, 10A, 1pol+N, Typ C Charakteristik

Überstromschalter, 13A, 1pol+N, Typ C Charakteristik

max. / mine. control, sensitivity range: 250O-500KO

Interface-Plug-in-Relais - Zelio RSB - 1 Wechslerkontakt - 230 V AC - 12 A