Komponenten für Schaltkästen und Schränke - Seite 37

Siemens Schütz,AC3e:15kW,1S+1Ö,DC24V

Siemens Schütz,AC3e:18,5kW,1S+1Ö,AC230V,50Hz

Siemens Schütz,AC3e:5,5kW 1Ö AC230V50/60Hz

Siemens Hilfsschalterblock, 3 S + 1 Ö

Siemens 3LD2203-1TL53 Elektroschalter 4P Rot, Gelb

Siemens SYN.-SU WOCHE 1W 3TE

Fernschalter mit 1 Schließer für AC 230V 16A Steuerung AC 8V

This Resi9 product is a switch disconnector. It is a 4 poles switch disconnector with 40A rated current at 415VAC. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. Electrical endurance goes up to 10000 cycles . Mechanical endurance goes up to 50000 cycles . The Ui rated insulation voltage is 500 VAC. It has a Uimp rated impulse withstand voltage of 6kV. The operating frequency is 50Hz or 60Hz. It can be mounted on a DIN rail for modular installation. Its width is 8 pitches of 9mm. The dimensions are (W) 72mm x (H) 81mm x (D) 70.5mm . The product weight is 309g. The color is white (RAL9003). According to IEC 60529 standard, the degree of protection is IP20 or IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with EN/IEC 60669-2-4 standard.

This MicroLogic 2.2 is a 3 poles 3d electronic trip unit used on ComPacT NSX 100/160/250 circuit breakers. This 100A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

This Acti9 electrical auxiliary is a modular OC contact used as remote indication ot the position of the associated device. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 1 position switch with contacts type 1 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA and iC60 RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. The iOF is either used for device short name or compatibility code. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product colour is white (RAL 9003). The pollution degree is 3. The level of tropicalisation is treatment 2. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type. According to IEC 60529 sta

This MicroLogic 2.2 is a 4 poles 4d electronic trip unit used on ComPacT NSX 250 circuit breakers. This 250A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

Schneider Electric A9F04463 Stromunterbrecher 4

Schneider Electric iC40N Stromunterbrecher 3P

This is a 3 poles basic frame for ComPacT NSX160N. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 50kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160N is part of Schneider Electric EcoStruxure Power architecture.

TeSys GV3, rotary handle kit, IP54, black, for GV3L & GV3p. range: TeSys - device short name: GV3AP - product or component type: rotary handle kit - accessory / separate part category: control accessory - handle colour: black. Benefits: A stronger, safer, and long-term connection. Designed with the new and ingenious, EverLink* patented, power terminal system, TeSys GV3 circuit-breaker provides a more reliable connection quality: the tightening pressure applied to the cables remain stable, strong and long-lasting even under tough conditions. Common additive parts to GV2 and GV3 ranges provide simplicity and significant installation time saving.... Applications: - Industry, infrastructures, buildings: Used for motor control and protection, complying with IEC 947-2 and IEC 947-4-1 standards... *Schneider patent....

Schneider Electric C60BP Stromunterbrecher 2P

Schneider Electric C60SP Stromunterbrecher 2P

Siemens FI/LS 1+N 2TE 10kA Typ A 30mA C10

Siemens Sicherungssockel

Siemens Steckrelais Komplettgerät DC24V, 2 W

Siemens LS-SCHALTER 6KA3+N-POL C16

Siemens 5SY43167 Stromunterbrecher Miniatur-Leistungsschalter Typ C 3

Siemens Steckrelais Komplettgerät AC 115V, 2 W

Siemens ISOLIERSTOFFGEHAEUSE SCHMAL BGR.S0

Siemens LS-SCHALTER 6KA1+N-POL C4