Bohrer & Bits - Seite 55

Makita D-17273 Drill Hole Saw

Makita D-17273 Lochsäge

10,55 € (8,79 €)

Bestellware. 8-10 Tage Lieferzeit

Makita D-17083 Drill Hole Saw

Makita D-17083 Lochsäge

12,01 € (10,01 €)

Bestellware. 8-10 Tage Lieferzeit

Makita Impact Wrench Socket

Makita E-16237 Impact Wrench Socket 32 mm.

12,82 € (10,68 €)

Bestellware. 8-10 Tage Lieferzeit

Makita Screwdriver Bit - 3 Pieces

Schraubendreher-Bit, 3 Stücke, phillips, PH2, Inbus, Länge: 50 mm, für Makita DHP482RTJ

6,70 € (5,58 €)

Bestellware. 8-10 Tage Lieferzeit

Makita Drill Bit

Bohrer, für Mauerwerk, Stein, Ziegelsteine, Kalksandstein, 8 mm, zylindrisch, Länge: 110 mm, für Makita DHP482RTJ

5,39 € (4,49 €)

Bestellware. 8-10 Tage Lieferzeit

Makita Drill Bit - for Metal

Bohrer, für Metall, 4.5 mm, Länge: 80 mm, für Makita DHP482RTJ

5,93 € (4,94 €)

Bestellware. 8-10 Tage Lieferzeit

Makita Impact Screwdriver Bit - 2 Pieces

Impakt-Schraubendreherbit, 2 Stücke, phillips, PH3, Inbus, Länge: 25 mm

8,02 € (6,68 €)

Bestellware. 8-10 Tage Lieferzeit

Makita D-77796 Metal Drill Bit HSS-GS 5.0x86mm

Makita D-77796 Bohrer

6,10 € (5,08 €)

Verfügbar - 6-8 Werktage Lieferzeit

Makita B-58154 Nemesis II Drill Bit

Bohrer, für Beton, Stein, Hammereinsatz, 8 mm, SDS-plus, Länge: 465 mm

20,33 € (16,94 €)

Verfügbar - 6-8 Werktage Lieferzeit

Makita D-77780 Metal Drill Bit HSS-GS 4.5x80mm

Makita D-77780 Bohrer

5,93 € (4,94 €)

Verfügbar - 6-8 Werktage Lieferzeit

Makita E-14766 Nemesis II Drill Bit

Bohrer, für Beton, Stahlbeton, Ziegelsteine, Hammereinsatz, 16 mm, SDS-plus, Länge: 315 mm, für XGT HR008GM202

22,78 € (18,98 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch router bit - for hardwood abrasive materials

Abrundfräser, für Hartholz, Schleifmittel, 6 mm, Länge: 53 mm

21,70 € (18,08 €)

Verfügbar - 7-9 Werktage Lieferzeit

Makita Chisel - for Concrete Masonry

Chisel, for concrete, masonry, flat, SDS-plus, length: 250 mm, width: 20 mm, for Makita DHK180Z, DHR243RTJ, DHR243Z

10,73 € (8,94 €)

Verfügbar - 4-6 Werktage Lieferzeit

Bosch Metal Drill Bit HSS-G 4.7 x 80 mm 10 pcs.

Bosch 2 608 585 489 Nicht kategorisiert

11,68 € (9,73 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 8.7MM 10 STK

Bosch HSS Twist Drill Bits PointTeQ

21,28 € (17,73 €)

Verfügbar - 7-9 Werktage Lieferzeit

Wiha slimbit electric bit

Schraubendreher-Bit, torx, T20, Länge: 75 mm

7,69 € (6,41 €)

Verfügbar - 4-6 Werktage Lieferzeit

Milwaukee Vinkelforsats 10 Shockwave m/10bits PH/PZ/TX

Milwaukee 4932471274 manual screwdriver Set

27,56 € (22,97 €)

Bestellware. 8-10 Tage Lieferzeit

Bosch HAMMERBOR SDS-P P3 25X200/250MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

20,69 € (17,24 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 24X400/450MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

28,61 € (23,84 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 13X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

7,01 € (5,84 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch FORSTNERBOR HM 40MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for use with portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with tungsten diamond-ground carbide cutters, achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package contains 1 piece.

46,81 € (39,01 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 12X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

7,80 € (6,50 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 10X400/460MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

12,34 € (10,28 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 8X150/210MM

5,66 € (4,72 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch FORSTNERBOR HM 34MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

42,01 € (35,01 €)

Verfügbar - 7-9 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen