Bohrer & Bits - Seite 56

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für Trockenbohrungen ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Bohren ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und Akkubohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

Bohrer, Spiralbohrer, 3 mm, zylindrisch, Länge: 61 mm (Packung mit 10)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

Bohrer, für Kunststoff, Buntmetall, Gusseisen, Stahlguß, legierter Stahl, unlegierter Stahl, Spiralbohrer 18 mm zylindrisch

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

Drill bit, for plastic, non-ferrous metal, cast iron, cast steel, alloyed steel, non-alloyed steel, twist bit, 15 mm, cylindrical

Schraubenziehersatz, 21 Stücke, torx, phillips, pozidriv, hex, slot

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 450 mm

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Flachfräsbohrer mit Sechskantschaft für den Einsatz mit einer Bohrmaschine, mit 30 mm Bohrerdurchmesser und 165 mm Gesamtlänge.

Bosch Flat Spade Drill Bit, hex umfasst 1 Bohrer mit 5.5 mm Schaftdurchmesser und 120 mm Arbeitslänge, geeignet zum Bohren in Weichholz und mittelhartem Holz.

Glas- und Fliesenbohrer von Bosch mit 4.0 mm Durchmesser und 64 mm Gesamtlänge zum Bohren in natürlichen Materialien wie Glas, Stein und Wandfliesen.

Bosch Glass and Tile Drill Bit ist für präzise Bohrarbeiten in harten, glatten Oberflächen ausgelegt, mit Spezifikationen, die klar für gängige Arbeiten an Glas, Stein und Fliesen geeignet sind.

Holzbohrer-Set mit drei Größen (6.0, 8.0 und 10.0 mm) und zylindrischem Schaft zum Bohren in Holzwerkstoffen.

Bosch 3-piece Wood Drill Bit Set enthält Bohrer für den Einsatz in Hart-/Massivholz, Weichholz und Akustikplatten und bietet eine kleine, praktische Auswahl für gängige Holzbohrarbeiten.

V-Line TiN Bohrer- und Bit-Set mit Ratschenschraubendreher und magnetischem Stab, enthält 91 Teile

Bosch 2 609 255 213 Bohrer 1 Stück(e)

Bohrer, Spiralbohrer, 2 Stück, zylindrisch, Länge: 49 mm

Bosch 2609255215 8 pc(s)

Bohrer, Spiralbohrer, 4 mm, zylindrisch, Länge: 75 mm (Packung mit 2)

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Bohrer, für Beton, Mauerwerk, Stein, 8 mm, zylindrisch, Länge: 150 mm

Bosch 2 609 256 902 Bohrer 1 Stück(e)