Bohrer & Bits - Seite 54

Makita SDS-PLUS 8X165MM NEMESIS II

NEMESIS II ist ein Vier-Schneider-Bohrhammer mit SDS-Plus-Aufnahme

9,65 € (8,04 €)

Bestellware. 8-10 Tage Lieferzeit

Boxer Socket and bit set - 52 pieces

4 - 4.5 - 5 - 6 -7 - 8 - 9 - 10 - 11 - 12mm
3/8"

36,91 € (30,76 €)

Bestellware. 9-11 Tage Lieferzeit

Bosch HAMMERBOR SDS-P P3 8X400/460MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

11,75 € (9,79 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 10X150/210MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

6,20 € (5,17 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-G LANG 3.2X66X100MM 5 STK

12,00 € (10,00 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch DIAMANTHULSAV 57MM DRYSPEED

Es ist geeignet für den Einsatz mit Winkelschleifern. Die Dry Speed Diamantscheibe bietet eine lange Lebensdauer beim Trockenbohren in harten keramischen Materialien. Ihre Premium-Diamanten sorgen für sehr hohe Bohrgeschwindigkeiten und ihre Vakuum-Löttechnologie gewährleistet eine lange Lebensdauer. Dieses Produkt ist für Fliesen gedacht, von weichen Wandfliesen bis hin zu sehr harten Bodenfliesen wie Steinzeug

109,86 € (91,55 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 5.1X86MM 10STK

25,49 € (21,24 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-G S 9.5X125MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

7,91 € (6,59 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch FLISEBOR EXPERT 5.5X70MM

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für trockenes Bohren ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Ohne Schlagfunktion bei niedrigen Geschwindigkeiten bohren. Der Bohrkopf ist kompatibel mit Strom- und batteriebetriebenen Bohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

6,48 € (5,40 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 4.8X86MM

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

2,05 €

Aktion abgelaufen

4,19 € (3,49 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 18.0/12MM

Bohrer, für Kunststoff, Buntmetall, Gusseisen, Stahlguß, legierter Stahl, unlegierter Stahl, Spiralbohrer 18 mm zylindrisch

13,55 € (11,29 €)

Bestellware. 8-10 Tage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 1.6MM 10STK

7,19 € (5,99 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S S 4X75MM 10STK

Bohrer, Spiralbohrer, 4 mm, zylindrisch, Länge: 75 mm (Packung mit 10)

17,15 € (14,29 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

15,97 € (13,31 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 1.4MM 10STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

7,09 € (5,91 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 2.5X57MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

13,61 € (11,34 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 2X49MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

12,94 € (10,78 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch SPIRALBOR SEKSKANTSKAFT 28X470X600MM

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

73,36 € (61,13 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch BOREPATRON SELVSP 1.5-13MM GSB 13-/16RE

Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Das selbstspannende Bohrfutter ist ein Bosch-System-Bohrfutter mit einer Spannkraft von Ø 1,5 bis 13 mm. Es zieht den Bohrer leicht fest und erfordert keinen Schlüssel. Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Selbstspannendes Bohrfutter, verchromt

41,72 € (34,77 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 12.4MM 5STK

23,47 € (19,56 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch BITS R3 XH L:25MM 3 STK

Es hat eine externe sechseckige Welle von 1/4 Zoll und ist für die universelle Montage von Schrauben mit Schraubendrehern und Schraubmaschinen vorgesehen. Dieser Extra-Hart-Schraubendreher-Bit ist eine gute Wahl für vielseitigen Einsatz. Alle Aufgaben können dank des modifizierten S2-Stahls des Bits und eines optimierten Wärmebehandlungsprozesses ausgeführt werden, der extra harte Qualität bietet und ausreichende Leistung bei allen Aufgaben ermöglicht. Die konische Torsionszone des Bits bewältigt problemlos maximale Umfangsgeschwindigkeiten beim Absorbieren von Kraft und Vibrationen während der Schraubenmontage, was es für alle Aufgaben geeignet macht. Antriebseinheit ISO 1173 C6.3, externes Sechseck mit 1/4"

4,19 € (3,49 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch GIPSSKRUE M/BORSPIDS 3.5X35MM 1000STK

26,58 € (22,15 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 4.9MM 10STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

7,72 € (6,43 €)

Verfügbar - 7-9 Werktage Lieferzeit

Bosch BITS PZ2 L:152MM

7,56 € (6,30 €)

Verfügbar - 7-9 Werktage Lieferzeit

Makita D-17273 Drill Hole Saw

Makita D-17273 Lochsäge

10,55 € (8,79 €)

Bestellware. 8-10 Tage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen