Bohrer & Bits - Seite 53

Bohrer, für Beton, Stein, Hammereinsatz, 6 mm, SDS-plus, Länge: 115 mm, für XGT HR008GM202

Drill bit, taper bit, 22 mm, cylindrical, length: 600 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 600 mm

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für Trockenbohrungen ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Bohren ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und Akkubohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

Drill bit, for concrete, masonry, hammer bit, 26 mm, SDS-plus, length: 450 mm

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 450 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

Bosch 2609255076 Twist drill bit 1 pc(s)

Diameter mm x length mm: 5.5x100; 6.0x100; 7.0x100
Concrete|Concrete Stone|Natural Stone|Masonry Concrete|Reinforced concrete

Holzbohrer-Set mit drei Größen (6.0, 8.0 und 10.0 mm) und zylindrischem Schaft zum Bohren in Holzwerkstoffen.

Bosch 3-piece Wood Drill Bit Set enthält Bohrer für den Einsatz in Hart-/Massivholz, Weichholz und Akustikplatten und bietet eine kleine, praktische Auswahl für gängige Holzbohrarbeiten.

Bit-Set für Innen-Torx-(T)-Schrauben mit 10 Teilen, inklusive magnetischem Universalhalter und 25 mm Bits mit 1/4" Außensechskantschaft (ISO 1173 C6.3).

Bosch 10-teiliges Schrauberbit-Set Standard für Innen-Torx-Schrauben (T) umfasst Bits T10, T15, T20, T25 (2x), T27, T30 und T40 (2x) sowie einen magnetischen Universalhalter für sicheren Bit-Halt und schnellen Wechsel.

Bosch 2609256905 1 pc(s)

Fliesenbohrer mit 14.0 mm Durchmesser, 8.0 mm Schaftdurchmesser und 90 mm Gesamtlänge, ausgelegt für Stein und Fliesen einschließlich Wandfliesen.

Bosch Tile Drill Bit bietet eine präzise Passform zum Bohren in Stein- und Fliesenoberflächen, mit einem robusten 8.0 mm Schaft und einem 14.0 mm Bohrerdurchmesser für gleichmäßige Ergebnisse.