Bohrer & Bits - Seite 51

Bosch HAMMERBOR SDS-P P3 4X50/110MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

4,03 € (3,36 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FLADBOR JUSTERBART 15-45MM

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

37,22 € (31,02 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch HAMMERBOR SDS-P P3 6X50/110MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

3,72 € (3,10 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch DIAMANTBOR VÅD 37X400MM 1/2T BEST C

117,36 € (97,80 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆSPIRALBOR CV 30 X 220MM

The drill bit is equipped with a cylindrical shaft system. The dowel drill bit ensures precise drilling in both soft and hard wood and can be used for both through holes and pocket holes. The extremely sharp drill head with centering point makes it possible to place the hole precisely. High-quality support cutters with precise edges produce splinter-free holes. The two flutes of the bit prevent material from clogging the hole and ensure good material removal and a precise result. The drill bit can be used for drilling in both soft and hard wood.
Package of 1 piece.

33,83 € (28,19 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch FORSTNERBOR HM 22MM

Denne hængselskærerbit er forsynet med et cylinderformet skaftsystem og er beregnet til bærbare skruemaskiner og borestandere. Hængselskærerbitten af karbid sikrer præcise resultater i abrasive materialer. Bittens særlige egenskaber gør den til det maskinsnedkerens og tømrerens foretrukne værktøj, især inden for produktion af vinder, døre og køkkener. Bitten, der er fremstillet med skær af karbid med diamantslebet wolfram, opnår imponerende resultater. Derudover er centreringsspidsen garant for en perfekt start på boringen, og de to primære og de to sekundære sideskær skærer ubesværet gennem materialer og opnår dermed ekstremt præcise og splintfri bundhulsdiametre. Bitten er særligt velegnet til abrasive materialer på hårdt træ, krydsfiner, spånplader og træfiberplader.
Pakke med 1 stk.

31,06 € (25,88 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BETONBOR CYL5 10X250MM

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for drilling tasks, and reduced power loss results in less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board which guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

11,60 € (9,67 €)

Bestellware. 7-9 Tage Lieferzeit

Bosch HAMMERBOR SDS P-5 18X600MM

Drill bit, for concrete, masonry, hammer bit, 18 mm, SDS-plus, length: 600 mm

41,26 € (34,38 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRINBOR M10-M40 HSS-ALTIN

The drill head for step drilling is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single tool. It is ideal for deburring, drilling round holes, and enlarging existing ones. Center punch marks are not necessary because the split point design allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smoother drilling. The most optimal cutting edge geometry and absolute smoothness are ensured thanks to axial and radial relief grinding.This step drill head is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.Threaded core holes for cable glands:Ø 6-8.5-10.5-14.5-18.-23.-30.-38.mm;M10x1 .5-M12x1 .5-M16x1 .5-M20x1 .5-M25x1 .5-M32x1 .5-M40 x 1 , 50Through-holes for cable glands:Ø6 -10 , 512 ,516 -20 ,525 -28 -32 ,535 -40 mm;M10 x 15 M12 x15 M16 x15 M20 x15 M25 xlS M32xlS MOxlS

153,86 € (128,22 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G 6.4X101MM 10 STK

20,18 € (16,82 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SNEGLEBOR SW11 22X360X450MM

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 450 mm

36,46 € (30,38 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch SPIRALBOR 7X100X160MM SEKSKANTSKAFT

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

10,49 € (8,74 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-G 9X175MM 5 STK

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package of 5 pieces.

36,70 € (30,58 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BOREPATRON SSB 1/2-20 Ø2-13MM H/V

48,83 € (40,69 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 5.5X93MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

25,49 € (21,24 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 15.0/12MM

Drill bit, for plastic, non-ferrous metal, cast iron, cast steel, alloyed steel, non-alloyed steel, twist bit, 15 mm, cylindrical

12,50 € (10,42 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆSNEGLEBOR 6 STK L450MM Ø10-20MM

Die Bohrerspitze hat ein sechseckiges Schaftsystem und ist kompatibel mit allen Schraubendrehern mit einem 13 mm Spannfutter. Der Spiralbohrer eignet sich für schnelles und präzises Bohren beim Durchbohren von Löchern, Vorbohren für Sparrennägel und Bohren von tiefen Dübel-Löchern in Holz. Die leistungsstarke selbstfütternde Spitze zieht den Bohrer durch, um schnelles und präzises Bohren bei geringem Stromverbrauch zu gewährleisten. Die optimierte Niedrigreibungsgeometrie des Bits mit massivem Kern sorgt für gerade Löcher, hohe Späneentfernung und höhere Arbeitsgeschwindigkeit. Der optimierte Führungskantenbereich des Bits sowie die präzisionsgeschliffene Kopfschneidekante erzeugen genaue Löcher. Geeignet für den Einsatz im Bauhandwerk, Zimmerer-, Dachdecker-und ist sowohl für Weichholz als auch Hartholz geeignet.Spiralbohrerset mit 6 Stück

93,24 € (77,70 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch BITSSÆT M2 PH/PZ XH QH 25MM 13 STK

29,45 € (24,54 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch TRÆSNEGLEBOR 6 STK L235MM Ø10-20MM

Bohrer-Set, für Weichholz, Hartholz, Schlangenbohrer, 6 Stücke, 10 mm, 12 mm, 14 mm, 20 mm ,18mm ,16mm ,Sechskant-Aufnahme,Länge:235mm

72,26 € (60,22 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITSSÆT M1 PH/PZ/T XH QH 25MM 13 STK

29,62 € (24,68 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITSSÆT MED KARABINHAGE 21DELE FUCHSIA

Schraubenziehersatz, 21 Stücke, torx, phillips, pozidriv, hex, slot

10,28 € (8,57 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS IMPACT PH2 65MM 8DEL

The double-ended screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high impact of wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes top keys as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to get a custom set tailored to your needs. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially wrenches.
Package of 8 (index)
8 double-ended screwdriver bits

14,96 € (12,47 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITS T10/15/20/25/30 25MM 5 STK

5,86 € (4,88 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BITSSÆT IMPACT PH/PZ 1-2-3 50MM 8STK

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes sockets as well as the Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to create an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick-and-Click boxes (size M & L) for customized bit sets. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially impact wrenches.
Package with 8 pcs (index)

14,96 € (12,47 €)

Verfügbar - 6-8 Werktage Lieferzeit

Bosch BIT T8 L:49MM

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

3,34 € (2,78 €)

Verfügbar - 6-8 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen