T-Stück - Kupfer - Lötverbindung d1: 22, d2: 28, d3: 22 (Qualitätssiegel für d12-54)

Crossover-Kupfer-Lötverbindungen: 22 (Qualitätssiegel für d12-54)

Elbow 90°- copper- soldered connection, plug-in end d: 28(quality seal for d12-54)

Viega 95002A

Long nipple- gunmetal- R-threadR: 1, L: 50

Viega 94270G

Viega 94270G

Viega 94471G

Wall plate- gunmetal- soldered connection, Rp-threadd: 12, Rp: 12

Long nipple- gunmetal- R-thread

Adapter - gunmetal - soldered connection, Rp-thread d: 22, Rp: 34

Viega 94243G

Adapter - gunmetal - soldered connection, Rp-thread d: 28, Rp: 34

Cap - Kupfer - gelötete Verbindung d: 12

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test mark DN: 20, d: 22, G: 34

Adapter - Gunmetal - gelötete Verbindung, R-Gewinde d: 15, R: 12

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 50, d: 54

Viega 95243

Adapter - gunmetal - gelötete Verbindung, R-Gewinde: 12, R: 12

Viega 94243G

Reducer- gunmetal- R-thread, Rp-thread- round

Viega 94340G

Viega 1116.1XL

Megapress Adapter with SC-Contur- for steel pipes in accordance with DIN EN 10220/10255 - non-alloyed steel, zinc-nickel coating- press connection, Rp-threadComponentsEPDM sealing element, cutting ring, separator ring, polygonDN: 10, D: 38, Rp: 38

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f