Drains and odour traps in acc. with DIN EN 274 for washbasins and bidets – design versions and accessories.High-quality building technology with simple assembly.Visign universal and slotted valves with open cover or click-close cover.Space-saving odour traps for concealed and pre-wall mounting.Design versions.Bottle or pipe odour traps made of brass or plastic.Accessories for special installation situations.

Easytop-Kugelhahn mit SC-Contur-PressanschlüssenKomponentenVentilgehäuse aus Rotguss oder Siliziumbronze gemäß DIN 50930-6 / DIN EN 1982, wartungsfreie Schaltwelle, Betätigungshebel T-förmig mit mittlerer Markierung grün/rot austauschbar, Edelstahlkugel, EPDM-Dichtelemente.Technische DatenBetriebsdruck max. 1,6 MPa (PN 16)Betriebstemperatur max. 110 °Cmit DVGW-PrüfzeichenDN: 20, d:22

Viega 1622

Reduzierstück - Gunmetal - R-Gewinde, Rp-Gewinde - rund R: 38, Rp: 12

Nipple- gunmetal- G-threadG: 34

Long nipple- gunmetal- R-threadR: 34, L: 40

Reduzierstück für den Abfluss der Küchenspüle aus weißem Kunststoff

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Schraubanschluss- Gunmetal- R-Gewinde, Rp-Gewinde- konische Dichtung

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, R-Gewinde: 40, R: 114

Viega 2318

Viega 2215.1

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 15, R: 12

Abläufe und Geruchverschlüsse gemäß DIN EN 274 für Waschbecken und Bidets - Designvarianten und Zubehör. Hochwertige Bautechnologie mit einfacher Montage. Visign Universal- und Schlitzventile mit offener Abdeckung oder Klickschließabdeckung. Platzsparende Geruchverschlüsse für verdeckte und Vorwandmontage. Designvarianten. Flaschen- oder Rohrgeruchverschlüsse aus Messing oder Kunststoff. Zubehör für spezielle Installationsbedingungen.

Schraubanschluss- Gunmetal- Rp-Gewinde- konische Dichtung

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 18, d2: 15, d3: 18

Viega 2416.1

Viega 1126XL

Viega 1118XL

Adapter Ellenbogen 90° - Gunmetal - gelötete Verbindung, Rp-Gewinde d: 12, Rp: 12

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 25, Rp: 34, d2: 25

Viega 2315

Viega 2312.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Megapress Adapter mit SC-Contur für Trinkwasserinstallation - Stahlrohre gemäß DIN EN 10220/10255 mit Verzinkung gemäß DIN EN 10240 - Rotguss oder Siliziumbronze - Pressverbindungen Komponenten EPDM-Dichtelemente, Schneidring, Trennring DN: 40, D: 112, d: 42