Viega - Seite 3

Cap- gunmetal- Rp-threadComponentsPolygonRp: 12

Viega 1126.1

T-Stück - Kupfer - Lötverbindung d1: 15, d2: 12, d3: 15 (Qualitätssiegel für d12-54)

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 42, d2: 28, d3: 42

Ellenbogen 45° - Kupfer - gelötete Verbindung, Steckende: 15 (Qualitätssiegel für d12-54)

Viega 1115

Viega 95243

Reduzierung der Kopplung - Kupfer - gelötete Verbindung d1: 12, d2: 10

Adapter - Gunmetal - gelötete Verbindung, R-Gewinde: 18, R: 12

Viega connection elbow 90° ø110/155 x 50 mm

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpresse

Long nipple- gunmetal- R-thread

Viega 95090

Langer Nippel in Waffengrau mit R-Gewinde. R: 34, L: 180 mm

Viega 2312.1

Viega 2226

Viega 2212

Viega 2316

Easytop Ball valve with SC-Contur- press connection, Rp-threadsComponents Valve casing in gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable, EPDM sealing element.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °C with DVGW-test markDN: 25, d: 28, Rp: 1

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 34

Viega 2325.5

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 42, Rp: 12, d2: 42

Viega 2315

Armaturen mit Gewinden gemäß DINEN 10226, Teil 1, zertifiziert für Trinkwasser gemäß DIN 1988 und Gasinstallationen gemäß TRGI 2008 (beachten Sie die Hinweise zum Modell), getestet gemäß DVGW-Arbeitsblatt GW 6 und GW 393. Zertifikate aus Rotguss-Gewindefittings - DVGW-Reg.-Nr. DV-7401AO2957 Gewindeverbindungen R-Außengewinde, vor Ort hergestellt - Hanf ohne Vergröberung des Gewindes ist möglich.