Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 16

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

T-piece - copper - solder connection.

T-piece - copper - solder connection.

T-piece - copper - solder connection.

For repair of the internal circulation pipe - suitable for Smartloop pipe Model 2007.3

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Reducer- gunmetal- R-thread, Rp-thread- round

T-piece- gunmetal or silicon bronze- Rp-threads

Adapter - gunmetal - soldered connection, Rp-thread.

Plug-in piece - gunmetal - plug-in end, Rp-thread.

T-piece - copper - solder connection.

Plug-in piece - gunmetal - plug-in end, Rp-thread.

Viega pipe marker pen model 2490.1.

Megapress Adapter with SC-Contur- for steel pipes in accordance with DIN EN 10220/10255 - non-alloyed steel, zinc-nickel coating- press connection, R-threadComponentsEPDM sealing element, cutting ring, separator ring, polygonDN: 10, D: 38, R: 38

Schlitzventil - Messingkomponenten - Ventilstöpsel G: 114, Ø: 42 mm, Ausführung: verchromt

PP connection pipe Ø50 mm x 1 1/2". For sink with plug. White.

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.

Verbindungsstück 22,5° - für WC - Kunststoffteile - Lippen-DichtungDN: 100, L: 360, Version: Alpinweiß

Viega 2218

Viega 2215.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Elbow 45°- copper- soldered connectiond: 22(quality seal for d12-54)

Crossover-Kupfer-Lötverbindungen: 15 (Qualitätssiegel für d12-54)

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 54, d2: 22, d3: 54