Viega - Seite 21

Viega 1116.1

Viega 4212

Megapress Adapter mit SC-Contur für Trinkwasserinstallation - Stahlrohre gemäß DIN EN 10220/10255 mit Verzinkung gemäß DIN EN 10240 - Rotguss oder Siliziumbronze - Pressverbindungen Komponenten EPDM-Dichtelemente, Schneidring, Trennring DN: 40, D: 112, d: 42

Viega 1116XL

Viega 1116

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega 1112

Viega 1112

Viega 1126

Viega 1111

Viega 1115.1

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Prestabo T-Stück mit SC-Contur- verzinktem unlegiertem Stahl- PressverbindernKomponentenEPDM-Dichtelemented1: 28, d2: 15, d3: 28

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 2212

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 12

Viega 2212

Easytop Thermometer geeignet für Easytop-Ablassventil 2234.6KomponentenAnzeige 0–80 °C oder 32–176 °F

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2318

Viega 2312.1

Pressverbindersystem mit nach DVGW-Arbeitsblatt W 534 geprüften Pressverbindern aus Kupfer und Rotguss mit DVGW-Prüfsiegel und Rohren aus Kupfer nach EN 1057 nach DVGW-Arbeitsblatt GW 392.Geeignet für die Trinkwasserinstallation nach DIN 1988.Für die formstabile Unterputz- und Vorwandinstallation von Verteiler- und Steigleitungen im Viega-Komponentenverbund.PressverbinderAlle Größen mit SC-Contur - Verbindungen, die unverpresst bleiben, werden beim Befüllen des Systems sichtbar. Die SC-Contur ist zertifiziert und erfüllt die Anforderungen des DVGW-Arbeitsblattes W 534, Punkt 12.14, Verbindungen mit erzwungener Dichtheit.Viega gewährleistet bei Dichtheitsprüfungen mit Wasser die Erkennbarkeit unverpresster Verbindungen im Druckbereich 0,1 MPa-0,65 MPa, bei trockener Dichtheitsprüfung mit Druckluft oder Edelgasen von 22 hPa-0,3 MPa.KennzeichnungGrüner Punkt auf der PressverbindungDichtelementeEPDM, schwarz (Ethylen-Propylen-Dien-Monomer-Kautschuk), bis 110 °C

Viega 95270

Prestabo Adapter elbow 90° with SC-Contur- galvanised non-alloyed steel- press connection, R-threadComponentsEPDM sealing element, polygon.

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements.