Viega 2318

Viega 2315.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2315.1

Viega 2317.2

Viega 2315XL

Viega 2311

Sanpress Inox Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten, EPDM-Dichtelement, Polygon, VdS-Zertifizierung d: 22, R: 1

Sanpress Inox Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Polygond: 15, R: 34

Sanpress Inox XL Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Schneidring, Trennring, Polygon, VdS-Zertifizierung d: 76.1, R: 212

Sanpress Inox Sliding coupling with SC-Contur- steel non-corroding- press connectors ComponentsEPDM sealing elementsd: 18

Viega 2611

Viega 2611

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, VdS certificationd: 22, G: 34

Viega 95243

Ellenbogen 90° - Kupfer - gelötete Verbindung d1: 35, d2: 35

Ellenbogen 90° - Kupfer - gelötete Verbindung d1: 18, d2: 18

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2214.2

Viega 2211

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, Rp-threadComponentsEPDM sealing element, polygon, VdS certification d: 35, Rp: 114

Easytop Ball valve- Inlet/outlet: Rp-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable. Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 25, Rp: 1

Viega 2316.1

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 12

Easytop geneigtes Sitzventil (Freiflussventil) mit SC-Contur-Pressanschlüssen. Komponenten: Ventilgehäuse und -deckel aus Rotguss oder Siliziumbronze gemäß DIN 50930-6 / DIN EN 1982, Ventilsitz und Ventilteller-Einheit aus Edelstahl, Spindelübertragung, Positionsanzeige offen/geschlossen, ergonomisches Handrad und geschlossen mit mittlerer Markierung grün/rot austauschbar, Ablassschraube G14, EPDM-Dichtelemente. Technische Daten: Betriebsdruck max. 1,6 MPa (PN 16), Betriebstemperatur max. 90 °C mit DVGW-Prüfzeichen DN:40 d:42