Tilta - Seite 4

Tilta RS-WLC-T04-LANC Zubehör für Videostabilisator Steuerungskabel Schwarz Acrylnitril-Butadien-Styrol (ABS), Gummi, Edelstahl 1 Stück(e) BMCC, FS5/FS7, Blackmagic URSA, Blackmagic URSA Mini Pro G1/G2, Panasonic EVA1, Z CAM, Sony FX9/FX6, Panasonic BGH1

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs.

The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip.

Material of Construction CNC machined aluminum
Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm)
Weight Shipping: 2.8 lb (1.3 kg)

Basic Kit for RED Komodo including full camera cage, top handle, right side wooden handle, Manfrotto quick release plate, Arca quick release plate and cold shoe mounting bracket.

- Top Plate with Shoe Mount
- Proprietary QR Baseplate Adapter
- 4 x Rosette Mounts
- 1/4"-20 and 3/8"-16 Threads

These hand grip extension arms have angled Arri Standard Rosettes that allow you to create more space and comfort while operating on one of the various Tilta shoulder mount systems.

Tilta MB-TM-NMA Kamera-Montagezubehör

Tilta MB-T16-RCF Kamerafilterzubehör

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Protective armor for the Canon R5/R6

Tilta TA-T18-E Kameraausrüstung

Using two included screws, this compact black Manfrotto Quick Release Plate attaches to the bottom of Tilta full camera cage for the Sony a7C mirrorless camera. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto-compatible camera plates.

Note: This quick release plate is not compatible with the Tilta 15mm LWS Baseplate.

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

This adjustable arm for the Tiltaing Mini Follow Focus attaches directly to the body of the follow focus to allow you to attach it to a 15mm rod. The section of the arm where it attaches to the follow focus body can be swiveled back and forth so that you can easily adjust the follow focus to properly fit onto various lenses.
For lenses with different pitch gears, we will offer a variety of focus gear attachments.

Tilta MB-T16-67 Kamerafilterzubehör Filterhalter-Adapterring

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

The Nucleus Nano II Hand Wheel to DJI Ronin Control Adapter is the perfect option for controlling the DJI Focus Motor via the Nano II Hand Wheel.

This adapter mounts to either side of the RS2 or RS3 Pro’s NATO Rail Mounting Points and utilizes two screws for a secure connection.

The adapter features two sets of contact pins for the Nano II Hand Wheel, allowing users to mount the unit at different heights based on preference or clearance restrictions with the pan motor.

The Hand Wheel mounts to the adapter via its internal NATO clamp and can draw power from the gimbal body in addition to being able to control the motor.

Basic Kit for RED Komodo including full camera cage, top handle, right side wooden handle, Manfrotto quick release plate, Arca quick release plate and cold shoe mounting bracket.

This camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4"-20 mounting points as well as one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
A quick release top handle can be attached to the cage to provide for a comfortable camera operating setup.

Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level.

Inspired by the usefulness and ingenuity of this camera's design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

This camera cage provides complete protective armor for the Z CAM E2, E2C, E2G camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

Tilta MB-T16-85 Kamerafilterzubehör Filterhalter-Adapterring

Tilta TGA-MEP Zubehör für Videostabilisator Sockelplatte mit Schnelllöseadapter Schwarz Aluminium, Edelstahl 1 Stück(e) DJI DJI RS2, RSC2, RS3, RS3 Pro

Tilta TGA-TSB Kamera-Montagezubehör Kamerahalterung

Tilta MB-T16-VND Kamerafilterzubehör

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.