Tilta TA-T18-A Kameraausrüstung

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

The TILTA Seamless Focus Ring is designed to fit lenses with a diameter of 81mm to 83mm, providing smooth, precise focus adjustments for filmmakers. Its seamless design ensures secure operation without slipping, making it perfect for professional camera rigs.

The Tiltaing Seamless Focus Gear Ring is designed for lenses with a diameter of 85mm to 87mm, providing smooth and precise focus adjustments for filmmakers. Its seamless construction ensures a secure fit without slipping, offering reliable performance in professional setups.

For iPhone 15 Pro and Pro Max Smartphones

For the Khronos iPhone 15 Pro and Pro Max Case

This Battery Plate serves as a replacement for the one included in the Power Supply Module for DJI Transmission.

This plate can be installed onto the DJI Video Transmitter or Receiver and allows you to mount a V-Mount battery to the unit.

This can provide power as well as pass power through the module to the camera body when used with the other plate from the original kit. (not included)

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI Transmission System.

NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

- Nucleus Support Accommodates Control for Nucleus Nano II, Nucleus M and Nucleus Nano
- Dual Motor Control via Focus Dial and Motor Compatible Joystick
- Expanded Power for the Nano II Hand Wheel via the NATO Mount Contact Pins
- Mounting Points Perfect for Shoulder Rig Setups or for Mounting External Monitors
- Gimbal Ready Capability Supports DJI RS2 and RS3 Pro via Optional Wireless Receiver Module

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

Tilta MB-T16-SFT Kamerafilterzubehör Kamerafilterhalter

Kamerastativ, Schulterstativ

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Nikon Z8 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- Security Threads Provide Multiple Points of Contact for Improved Security
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

This 15mm Carbon Fiber Rod Set is the perfect option for users looking for lightweight LWS rods without sacrificing performance.

This set includes two carbon fiber rods which can be mounted to any LWS standard baseplate or 15mm rod holder in order to accommodate accessories such as follow focus system and matte boxes.

These rods are constructed using new manufacturing techniques that prevent them from degrading over time and feature a UV-Resistant Coating that keeps the matte black finish looking new after extended use.

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more.

The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments.

Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup.

The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4″-20 screws with locating pins .

Khronos Mini LED Panel Space Grey

For the Khronos iPhone 15 Pro and Pro Max Case

Nucleus-M II Top Handle Adapter for Hand Grip

TILTA NATO Clamp to Cold Shoe Adapter

Mirage Pro Matte Box Basic Kit

Included:
- T10 Allen key x1
- T6 Allen key x1
- 1/4" Torx screw x1
- M2x6 Torx screws x3
- M2x4 Torx screws x2

For Hydra Alien Mini, compatible with DJI Osmo Pocket 3

Materials: Nylon