Tilta

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

Sony’s long awaited, flagship mirrorless video/photo camera, the A7sIII, has finally arrived. Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level.

Inspired by the usefulness and ingenuity of this camera’s design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

Tilta TA-T01-A-B Kamerabox 1/4, 3/8" Schwarz

Tilta Rosette Extender Arm Erweiterungsarm

This Battery Plate serves as a replacement for the one included in the Power Supply Module for DJI Transmission.

This plate can be installed onto the DJI Video Transmitter or Receiver and allows you to mount a V-Mount battery to the unit.

This can provide power as well as pass power through the module to the camera body when used with the other plate from the original kit. (not included)

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI Transmission System.

NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

Tilta TA-T23-B-B Kameraausrüstung

When configured with the Gravity G Series Dual Pistol Grip Battery Handles, an operator can extend the G1/G2/G2X gimbal body’s operating life with eight fully charged 18650 batteries (4 in each handle). This will give up to 20 hours of power to your gimbal. If used in conjunction with the G1/G2/G2X Battery Pistol Grip Handle, up to 30 hours of runtime can be achieved.

These follow focus marking disks attach to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.

Tilta TA-T23-B Kameraausrüstung

Tilta TA-T18-HCC Kamerabox 1/4" Grau

Tilta MB-T15-C80 Kamerafilterzubehör Filterhalter-Adapterring

Stützsystem, Kamerakäfig, für Blackmagic Pocket Cinema Camera 4K, 6K

Tilta RS-TA-RD1 Zubehör für Videostabilisator Steuerungskabel Schwarz Kupfer, Edelstahl 1 Stück(e) RED Camera

This bracket attaches to the front of the Tiltaing Full Camera Cage for Sony a7C to provide support for a EF mount lens adapter.

- Protective Armor Prevents Wear & Tear on DJI Osmo Action 3 Camera Body
- Filter Ready Design Supports Optional Polarizer, ND, and MCUV Filters
- Quick Release Dual Sided Design Offers Easy Access to the Camera and Battery Compartment
- Lightweigt Design Improves Functionality without Adding Unnecessary Bullk
- Durable Aluminum and Stainless Steel Construction

Tilta BS-T10 Kamera-Montagezubehör Löseplatte

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

Tilta TA-T01-FCC-B Kamerabox 1/4, 3/8" Schwarz

Included:
- T10 Allen key x1
- T6 Allen key x1
- 1/4" Torx screw x1
- M2x6 Torx screws x3
- M2x4 Torx screws x2

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

Tilta MB-T15-62 Kamerafilterzubehör Filterhalter-Adapterring

Tilta WLC-T04-HWC-Z2 Kamera-Montagezubehör Handrad-Adapter

TILTA Sony Venice Rialto Camera Cage Vlock mount

Tilta GSS-T01-RSB Kamera-Montagezubehör Monitor-Halterung