Schneider Electric XACA2154 Nicht kategorisiert

Miniatur-Steckrelais - Zelio RXM - 3 Wechsler - 24 V DC - 10 A - mit LED

Residual current module 3P + N, 40A, 30mA, Class A. A fault current Vigi iC40 module is an add-on module for Acti9 iC40 type of circuit breakers. The result is optimum protection of humans, installations and electrical devices against over-currents, fault, an electric shock by direct and indirect contact, transients and fire hazard. This Vigi iC40 fault current module is 3 pole, marked to 40A, 400V and has a sensitivity of 30mA. The unit has test button on the front and is equipped with Schneider Electric's patented VisiTrip TM technology, which ensures rapid troubleshooting with clearly marked on the front. The module is 90 mm wide and easy mounting of clips on a DIN rail with automatic fuse.

empty control station-severe environments-black-3cut-outs-3 vertical openings

Schneider Electric XB5 Knopf

Kaedra - versatile for power outlet - 1 x 18+1 modules - 448 x 460 mm. Label: Kaedra, Mini Kaedra - range of product: Kaedra - range: Kaedra - product or component type: weatherproof enclosure - enclosure type: versatile enclosure for power outlet - Rang

Gasofen, Mobil

Kamm-Sammschiene - Einfach zu schneiden - Acti 9 ausgeglichen 4 Pole 24 Module 100A

Residual current fault current protective device RCD 3P + N, 40A, 400V, 30mA, Class A with N-terminal at the right side. Multi 9 residual current RCD (RCCB) protects people against electric shock by direct and indirect contact. In addition they protect installations against fire caused by the transition of the electric installations. This class A residual current circuit breaker is 3P + N pole, marked to 40A at 400V and has a sensitivity of 30 mA. The unit is equipped with test button on the front, 72 mm wide and suitable for mounting on DIN rail.

Beigefügter Kastenschalter-Trennschalter Vario VBF - 3 Pole - 20 A

Spannungswandler - 230..400 V - 1 x 24 V - 100 VA

Interpact circuitbreaker 4P

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

short terminal shield - 4 poles - 0<630

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected pole and 20A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 400VAC. It is DIN rail mountable. The width in 9mm pitches is 10. The product color is white (RAL9003). The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The weight is 500g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected poles and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 10. The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The product colour is white (RAL 9003). The product weight is 500g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mo

Schneider Electric Linergy DX Elektrische Abdeckung

iID - earth leakage protection - 4P - 40A - 300mA - A type

Resi9 CX is a surface-mounted distribution enclosure that can accommodate all types of modular switchgear.Mountingbb 4 oblong holes allow very quick horizontalityadjustment of the back.bb 4 screws for fast mounting on the insulating back.Removable DIN railbb The DIN rails can beremoved for easiercable routing.A large number of slots for terminal blocksbb The terminal block supports are clipped onto the top orbottom of the frame in many different ways.Each symmetrical rail has a hoodacity of26 modules of 9 mm (13 modules of 18 mm) or36 modules of 9 mm (18 modules of 18 mm).Considerable space is available under the frame.It allows insertion of cables and hands for easyinstallation.Easy entry cablebb The 4 surfaces of the hood are pre-cut out to insertcables or trunkings.bb The cables can enter via the 4 sides or via the bottom ofthe enclosure.

Schneider Electric RPM22P7 Nicht kategorisiert

Schneider Electric XPSUEP14AP Nicht kategorisiert

Schneider Electric ZB4 Knopf