Touchscreen-Display 5''7 Farbe

Power Tags energy sensor modules for 1P, 1P + N, 3P and 3P + N networks. They are mounted directly on equipment Acti 9 and Multi 9 series with module width of 18 mm up to 63 A. Combined with Acti 9 SI B (Bar) Smart Link (Ethernet) or Acti 9 SI D (Devices)

Linergy Durchgangsklemme - 2,5mm 24A Doppelstock 1x1 Schraube - grau

The RXG interface relay range comprises: 10 A relays with 1C/O contact and 5 A relays with 2C/O contacts. Sockets with separate contact terminals, screw connector connection and built-in plastic maintaining clamp, 35mm DIN rail mounting and Panel mounti

The RXG interface relay range comprises: 10 A relays with 1C/O contact and 5 A relays with 2C/O contacts. Sockets with separate contact terminals, screw connector connection and built-in plastic maintaining clamp, 35mm DIN rail mounting and Panel mounti

Argus standard outdoor 120 - blister

empty control station-severe environments-black-3cut-outs-3 vertical openings

Kaedra - versatile for power outlet - 1 x 18+1 modules - 448 x 460 mm. Label: Kaedra, Mini Kaedra - range of product: Kaedra - range: Kaedra - product or component type: weatherproof enclosure - enclosure type: versatile enclosure for power outlet - Rang

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

Schneider Electric Linergy DX Elektrische Abdeckung

Schnittstellen-Plug-in-Relais - Zelio RSB - 1 Wechslerkontakt - 12 V DC - 12 A

Resi9 CX is a surface-mounted distribution enclosure that can accommodate all types of modular switchgear.Mountingbb 4 oblong holes allow very quick horizontalityadjustment of the back.bb 4 screws for fast mounting on the insulating back.Removable DIN railbb The DIN rails can beremoved for easiercable routing.A large number of slots for terminal blocksbb The terminal block supports are clipped onto the top orbottom of the frame in many different ways.Each symmetrical rail has a hoodacity of26 modules of 9 mm (13 modules of 18 mm) or36 modules of 9 mm (18 modules of 18 mm).Considerable space is available under the frame.It allows insertion of cables and hands for easyinstallation.Easy entry cablebb The 4 surfaces of the hood are pre-cut out to insertcables or trunkings.bb The cables can enter via the 4 sides or via the bottom ofthe enclosure.

ClimaSys Zwangsentlüftung. IP54, 165m3/h, 24V DC, mit Auslassgitter und Filter G2

Kombi-Sammelschiene 3-polig + Neutralleiter 80A, 10 Module à 18mm, iID FI-Schutzschalter und iC60 Leitungsschutzschalter N,L1,L2,L3/N,L1,N,L2,N,L3......., RAL7016 230V/400VAC

iC60N - miniature circuit breaker - 1P + N - 25A - C curve

IEC / EN 60947-2 und IEC / EN 60898-1Gemäß den oben genannten Standards kombinieren Leitungsschutzschalter folgende Funktionen:- Schutz des Stromkreises gegen Kurzschlussströme- Schutz des Stromkreises gegen Überlastströme- geeignet für die Isolation

TeSys D Thermische Überlastrelais - 0,16...0,25 A - Klasse 10A

TeSys LE - Gehäuse für DOL-Starter - mit 2 Druckknöpfen

Motorlüfter 156 m3/h 230V

Interface-Plug-in-Relais - Zelio RSB - 1 Wechslerkontakt - 230 V AC - 12 A

short terminal shield - 4 poles - 0<630

Schneider Electric A9F04750 Stromunterbrecher 3

iC60N - Mini-Leitungsschutzschalter - 2-polig - 6A - D-Kurve

Acti9 IC60 RCBO 2P 10A 30mA C 10kA SI. Zum Schutz des Endkreises und zum Schutz von Personen vor elektrischem Schlag bei direktem Kontakt (30 mA). Sowie Erdschluss an der Frontplatte