This is a 3 poles basic frame for ComPacT NSX160F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160F is part of Schneider Electric EcoStruxure Power architecture.

Residual current fault current protective device RCD 3P + N, 40A, 400V, 30mA, Class A with N-terminal at the right side. Multi 9 residual current RCD (RCCB) protects people against electric shock by direct and indirect contact. In addition they protect installations against fire caused by the transition of the electric installations. This class A residual current circuit breaker is 3P + N pole, marked to 40A at 400V and has a sensitivity of 30 mA. The unit is equipped with test button on the front, 72 mm wide and suitable for mounting on DIN rail.

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Schneider Electric iID Stromunterbrecher 4P

Schneider Electric iID Stromunterbrecher 4P

Schneider Electric Acti9 iCV40 Stromunterbrecher 1P + N

Kamm-Sammschiene - Einfach zu schneiden - Acti 9 ausgeglichen 4 Pole 24 Module 100A

Schneider Electric iC60 RCBO Stromunterbrecher 4P

Schneider Electric Acti9 iCV40 Stromunterbrecher 1P + N

Schneider Electric A9C20864 Hilfskontakt

Schneider Electric iC40N Stromunterbrecher 1P + N

Residual current module 3P + N, 40A, 30mA, Class A. A fault current Vigi iC40 module is an add-on module for Acti9 iC40 type of circuit breakers. The result is optimum protection of humans, installations and electrical devices against over-currents, fault, an electric shock by direct and indirect contact, transients and fire hazard. This Vigi iC40 fault current module is 3 pole, marked to 40A, 400V and has a sensitivity of 30mA. The unit has test button on the front and is equipped with Schneider Electric's patented VisiTrip TM technology, which ensures rapid troubleshooting with clearly marked on the front. The module is 90 mm wide and easy mounting of clips on a DIN rail with automatic fuse.

Schneider Electric XPEA110 Elektroschalter Schwarz

Schneider Electric ZB4 Knopf

Schneider Electric XB5

Schneider Electric XB4BVB3 Alarmlichtindikator 24 V Grün

Schneider Electric XB5

Schneider Electric ZB5 Schütz

Schneider Electric ZB4BZ009 Montage-Kit Grau Metall

Schneider Electric XB5

Schneider Electric ZB4

Schneider Electric ZB4 Knopf

Schneider Electric XB5

Schneider Electric XALK178G Elektroschalter Drucktasten-Schalter Rot, Gelb

Schneider Electric ZB5AW363 Zubehör für elektrische Schalter