Komponenten für Schaltkästen und Schränke - Seite 45

Die ESB20..N Installationskontaktoren werden verwendet, um einzelne Lasten bis zu 20 A zu steuern und können mit AC- oder DC-Spannungen betrieben werden. Diese Kontaktoren sind für den Einsatz in Haushaltsanwendungen sowie in industriellen Umgebungen konzipiert. Folgende Vorteile werden geboten: Geräuschfreier Betrieb, geringer Stromverbrauch und integrierter Überspannungsschutz. Verschiedene Kontakt-Kombinationen und Zubehörteile sind erhältlich.

Shaft for selector type handle.

Terminalabdeckung für OT16...40F3, -FT3, 3-polige Abdeckung, transparent.

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

AF26 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Auxiliary Contact Block for AF-contactors

Fuse base neozed D02 63A

[7825200198]

Fuse NH2 63A GL/GG 500V

[7825200114]

[7825200127]

Safety NH2 250A GL/GG 500V

NH2 355A GL/GG 500V Fuse

Fuse NH2 224A GL/GG 500V

Montagegreb NH P215592

[7825300247]

Relay 16A 1NO+1NC 230VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Relay 16A 1NO+1NC 24VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 24 Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Contactor 25A 4NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Contactor 25A 4NO 24V 2MStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 24V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Latching relay electronic 1NO 8-24V

MCB 1P 6KA C-6A 1M

Time switch, automatic day-light-saving time

early-break/late-make auxiliary contact block - VARIO - 1 NO + 1 NC

Erdermodul - 40 A - für V02...V2