Entwässerungsprodukte - Seite 34

HighLine Farbrahmen Messing 900/10 mm. Edelstahl mit PVD-Beschichtung. Kann mit einem HighLine-Panel in Messing kombiniert werden. Der Rahmen ist auf Gummi montiert, um eine Montage am Ablaufkörper zu gewährleisten.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Wechsel von Jo-Flex 11/4 Nippel auf 40 mm.

Rahmen Unidrain 12 mm.

Geberit Doppelkammerfalle für Küchenspülen, mit abgewinkeltem Schlauchanschluss, vertikalem Auslass: d50mm G1 1/2 weiß alpin

PURUS floor drain bowl BRAGE 75 for vinyl floor vertical outlet Ø75mm w/white plastic grate and clamping ring, complete with water trap TYR 153479-225 VA-approved

Abflussschale Jo-flex 75 mm in PP mit Edelstahlrost.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Rahmen Unidrain 10 mm.

Vinyl-Abfluss in Edelstahl inklusive Rahmen und Gitter im Modell Säulenlänge 800 mm

Reduktion Jotiflex 50X40 kurz grau.

Outlet-Haus Unidrain Ø75 horizontal mit Wassersperre.

Water trap 50 mm water seal. Meets capacity and selfcleaning requirements according to EN 1253 (the panEuropean standard for floor drains) and is VA-approved. The water trap can be removed from the outlet unit and then dismantled for cleaning.

NOTE: Suitable only for outlet unit 1418.0050.

Purus Line package 800 is a complete drain channel with a 50 mm low horizontal outlet for installation in concrete and is suitable for 8 - 10 and 12 mm tiles using the included extension strips. The drain channel is equipped with a removable water trap, stainless steel frame and grate Rib. The drain channel can be installed against 1, 2 or 3 walls.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Horizontal outlet Ø 75 mm, including water trap.

Two horizontal side inlets, 40 mm, which can be opened as needed. 2 rubber adapters are included so that side inlets can be reduced to 32 mm. Easy access to the removable water trap for cleaning. Meets EN1253 standard and is VA approved.

Wavin PP branch pipe 45° 200/110mm

Wavin PP bend 88.5° 200mm

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.