Entwässerungsprodukte - Seite 36

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Armatur Unidrain 1004 800 mm ohne Flansch.

The water trap is removable and can be taken apart for cleaning

Note: The outlet unit can be used in 3 different ways:
– If the water trap is positioned at the top and the top two side spigots are used as inlets from an external unit, then a separate water trap must be installed on the added unit.
– If the water trap is pushed down into the outlet unit, the external unit connected to the top side spigots will be covered by the included water trap, so there is no need for an external water trap.
– If the bottom two side inlets are used, you must establish an external water trap, regardless of the position of the Unidrain water trap.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

Abflussschale Jo-flex 75 mm in PP mit Edelstahlrost.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

HighLine Farbrahmen Messing 900/10 mm. Edelstahl mit PVD-Beschichtung. Kann mit einem HighLine-Panel in Messing kombiniert werden. Der Rahmen ist auf Gummi montiert, um eine Montage am Ablaufkörper zu gewährleisten.

Reduktion Jotiflex 50X40 kurz grau.

The grate is placed on a recessed bearing in the frame, which ensures precise positioning.

Can only be used with ClassicLine frame.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Geberit Rohrschelle mit Gewindebuchse M8/M10: di=125mm

Wavin BRACKETS 40MM NO LOC DEV WHITE

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Dallmer ist ein komplettes Programm an Küchenablauf-Fallen und Verbindungen in weißem PP in den Größen 40 und 50 mm.

Das Wafix PP-System besteht aus dem wiederverwendbaren PP (Polypropylen), das sowohl Rohren als auch Fittings gute physikalische und chemische Eigenschaften verleiht. Das verwendete PP-Material hat einen hohen E-Modul, der den Rohren eine gute Längssteifigkeit und eine hohe Schlagfestigkeit verleiht. Daher hält das Wafix PP-System den Auswirkungen und Stößen stand, die während der Installation und des Betriebs auftreten können - selbst bei Minusgraden. Wafix PP ist ein komplettes Entwässerungssystem mit Rohren und Fittings in den Abmessungen: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm Das Programm ist auch in einer weißen Version in den Abmessungen Ø32, Ø40 und Ø50 mm erhältlich, die besonders für sichtbare Installationen geeignet ist. Der einzigartige Fix·lock® Dichtungsring des Systems dichtet an bis zu drei Punkten ab, bietet eine große Konstruktionsfläche gegenüber dem Rohr und stellt sicher, dass Ihre Verbindungen jedes Mal zu 100% dicht sind. Es bietet zusätzliche Sicherheit, wenn Sie die Rohre in einem Schacht einsetzen oder verstecken möchten.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Choose between two models. A panel completely without frame, or the model with panel including frame.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile).

The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.

The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

The grating is selected from among six attractive designs.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.