Bohrer & Bits - Seite 67

Bosch 2 608 585 489 Nicht kategorisiert

NEMESIS II ist ein Vier-Schneider-Bohrhammer mit SDS-Plus-Aufnahme

Bohrersatz, 31 Stücke, 1/4"

25 mm Schraubendreher-Bit, 2xPZ2

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Bohrersatz, für Mauerwerk, Stein, Ziegelsteine, Bausteine, Leichtbeton, 5 Stücke, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm, Länge: 85 mm, 100 mm, 110 mm, 70 m

The impact control screwdriver bit is very robust and can withstand even the high power of impact screwdrivers

Multifunctional drill bit for drilling metal, wood, stone and more 5.5x95xcyl

Schraubendreher-Bit, torx, T20, Länge: 75 mm

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Makita Bohrhammer-Set SDS-Plus 13-teilig

4 - 4.5 - 5 - 6 -7 - 8 - 9 - 10 - 11 - 12mm
3/8"

Bosch Schrauberbit extra-hart

Milwaukee 4932471274 manual screwdriver Set

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

Bohrer, für Weichholz, Hartholz, Brad-Point-Bohrer, 14 mm, zylindrisch, Länge: 151 mm

Es hat eine externe sechseckige Welle von 1/4 Zoll und ist für die universelle Montage von Schrauben mit Schraubendrehern und Schraubmaschinen vorgesehen. Dieser Extra-Hart-Schraubendreher-Bit ist eine gute Wahl für vielseitigen Einsatz. Alle Aufgaben können dank des modifizierten S2-Stahls des Bits und eines optimierten Wärmebehandlungsprozesses ausgeführt werden, der extra harte Qualität bietet und ausreichende Leistung bei allen Aufgaben ermöglicht. Die konische Torsionszone des Bits bewältigt problemlos maximale Umfangsgeschwindigkeiten beim Absorbieren von Kraft und Vibrationen während der Schraubenmontage, was es für alle Aufgaben geeignet macht. Antriebseinheit ISO 1173 C6.3, externes Sechseck mit 1/4"

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Es hat eine externe sechseckige Welle von 1/4 Zoll und ist für die universelle Montage von Schrauben mit Schraubendrehern und Schraubmaschinen vorgesehen. Dieser Extra-Hart-Schraubendreher-Bit ist eine gute Wahl für vielseitigen Einsatz. Dank des modifizierten S2-Stahls und eines optimierten Wärmebehandlungsprozesses, der extra harte Qualität bietet und ausreichende Leistung bei allen Aufgaben ermöglicht, können alle Aufgaben ausgeführt werden. Die konische Torsionszone des Bits bewältigt problemlos maximale Umfangsgeschwindigkeiten beim Absorbieren von Kraft und Vibrationen während der Schraubenmontage, was es für alle Aufgaben geeignet macht

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks