Bohrer & Bits - Seite 66

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit pack extra hard (PH) with 3 pieces

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2" - 20, 3/8" - 24, 5/8" - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation.
Hammer-resistant design

Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Das selbstspannende Bohrfutter ist ein Bosch-System-Bohrfutter mit einer Spannkraft von Ø 1,5 bis 13 mm. Es zieht den Bohrer leicht fest und erfordert keinen Schlüssel. Der selbstspannende Bohrfutter ist für Bosch-Hammerbohrer vorgesehen. Selbstspannendes Bohrfutter, verchromt

The SDS max-9 Stone drill bit has a long lifespan in stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality, wear-resistant carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. It is compatible with all SDS max holders on rotary hammers.
Package contains 1 piece.

Betonbohrer-Set umfasst drei Bosch Bohrer in 5.0x85, 6.0x100 und 8.0x120 zum Bohren in Beton, Stein, Naturstein, Mauerwerk und Stahlbeton.

Bosch 3-piece concrete drill bit set bietet eine praktische Auswahl gängiger Bohrergrößen für vielfältige Bohrarbeiten in harten Baustoffen.

The Bosch HSS-R metal drill bit, measuring 12x101x151 mm, is an excellent choice for anyone looking for a reliable tool for drilling metal. Thanks to the use of high-quality high-speed steel, this drill bit guarantees long-lasting performance and precision on every project.

Diameter mm: 15.0Shaft diameter mm: 6Working length mm: 30Total length mm: 55Shape: concaveWood|Hardwood/solid wood Wood|Lightweight construction panels Wood|MDF board unlaminated Wood|Softwood Wood|HDF board unlaminated Wood|Particleboard Wood|Multiplex boards Wood|Plywood/carpenter's plate Wood | Acoustic panels

Bosch 2 609 255 028 drill bit

Flacher Spatenbohrer mit Self Cut-Design mit 30.0 mm Durchmesser und 6.35 mm Sechskantschaft.

Bosch Self Cut Flat Spade Bit, hex shank ist mit 112 mm Arbeitslänge und 152 mm Gesamtlänge spezifiziert und für den Einsatz in Beton, Porenbeton, Holz und Akustikplatten vorgesehen.

Diameter mm x length mm: 5.5x100; 6.0x100; 7.0x100
Concrete|Concrete Stone|Natural Stone|Masonry Concrete|Reinforced concrete

Exzentrischer Aufsatz
Optimal für Schraubarbeiten in der Nähe des Randes
Passt zu Bosch Akkuschrauber IXO III, IXO IV und IXO V.

Bosch 2609256905 1 pc(s)

Passt für PSB 650 RE, PSB 750 RCE, PSB 750 RCA.

Holzspiralbohrer mit Sechskantschaft, 24.0 mm Durchmesser und 170 mm Arbeitslänge zum Bohren in Holz, einschließlich Weichholz und Akustikplatten.

Bosch Holzspiralbohrer, Sechskantschaft kombiniert einen 11 mm Schaftdurchmesser mit einer 235 mm Gesamtlänge, damit Sie tiefe, saubere Löcher in geeigneten Holzmaterialien bohren können.

V-Line TiN Bohrer- und Bit-Set mit Ratschenschraubendreher und magnetischem Stab, enthält 91 Teile

Holzraspel, zylindrisch-runde Form mit 13.0 mm Durchmesser, 6 mm Schaft, 35 mm Arbeitslänge und 65 mm Gesamtlänge für kontrollierten Materialabtrag.

Holzraspel, zylindrisch-rund ist für den Einsatz auf Weichholz, massivem Hartholz, unlaminierten HDF- und MDF-Platten, Spanplatten, leichten Bauplatten, Multiplexplatten, Sperrholz/Tischlerplatten sowie Akustikpaneelen vorgesehen.

Der Boden HSS Spiralbohrer zum Bohren von Metall mit maximaler Präzision. Der freiliegende 135-Grad-Split-Selbstzentrierungspunkt des Bohrkopfes kombiniert aktives Schneiden mit perfekter Zentrierung ohne Verschiebung für maximale Präzision. Mit der geteilten Spitze ist es auch nicht erforderlich, Zentrierpunkte im Voraus zu markieren oder bis zu 10 mm vorzubohren. Dieser präzisionsgeschliffene Bohrkopf aus HSS (Hochgeschwindigkeitsstahl) bietet bis zu 40% schnelleres Bohren und bis zu 50% niedrigeren Klemmdruck als standardmäßig geschliffene HSS-Schneidkanten-Bohrköpfe. Dieser Bohrkopf ist für das Bohren von Löchern in legiertem und unlegiertem Stahl, Gusseisen, Sinterguss, reduziertem Gusseisen, Nichteisenmetallen und Hartplastik ausgelegt. Der geschliffene HSS-Spiralbohrkopf wird gemäß DIN 338 hergestellt. Der Bohrkopf ist vom Typ N (nicht winklig) mit einem Punkt von 135 Grad und einer Durchmessertoleranz von h8. Es hat ein zylindrisches Schaftsystem (der Schaft hat den gleichen Durchmesser wie der Bohrkopf) und ist für den Einsatz in Ständerbohrmaschinen und Schraubendrehern vorgesehen.
Paket mit einem Stück.

Bohrer, Spiralbohrer, 2 Stück, zylindrisch, Länge: 49 mm

Bohrer, für Beton, Mauerwerk, Stein, 5 mm, zylindrisch, Länge: 85 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Für das Bohren in Beton, Mauerwerk, Natur- und Kunststein, Ziegel usw. Dreh-/Schlagbohrer mit Hartmetallspitze für Mauerwerk

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.