Bohrer & Bits - Seite 65

Bohrersatz, für Holz, Metall, Mauerwerk, Ziegelsteine, Spiralbohrer, Schlangenbohrer, 9 Stücke, 5 mm, 6 mm, 8 mm

Makita D-00038. Menge pro Packung: 1 Stück(e)

Bohrer, für Metall, 2.5 mm, Länge: 57 mm, für Makita DHP482RTJ

Bohrer, für Beton, Stein, Hammereinsatz, 6 mm, SDS-plus, Länge: 215 mm, für XGT HR008GM202

Meißel, für Beton, Stahlbeton, Ziegelsteine, poröser Beton, Putz, Kalksandstein, flach, SDS-plus, Länge: 200 mm, Breite: 38 mm, für Makita HK0500, HR003, HR004GM202, HR007GM201; XGT HR002GZ05, HR007, HR007GM201, HR008GM202

Drahttopfbürste, für Holz, Metall, Stahl, Hartholz, Rost, 50 mm, Inbus

Bohrersatz, für Mauerwerk, Stein, Ziegelsteine, Bausteine, Leichtbeton, 5 Stücke, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm, Länge: 85 mm, 100 mm, 110 mm, 70 m

Makita keyless chuck 13 mm sds-plus 122823-7

Bosch HSS Twist Drill Bits PointTeQ

Makita Bohrhammer-Set SDS-Plus 13-teilig

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Bohrer, für Weichholz, Hartholz, Brad-Point-Bohrer, 14 mm, zylindrisch, Länge: 151 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The drill bit is equipped with a cylindrical shaft system. The dowel drill bit ensures precise drilling in both soft and hard wood and can be used for both through holes and pocket holes. The extremely sharp drill head with centering point makes it possible to place the hole precisely. High-quality support cutters with precise edges produce splinter-free holes. The two flutes of the bit prevent material from clogging the hole, ensuring good material removal and a precise result. The drill bit can be used for drilling in both soft and hard wood.
Package of 1 piece.

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

Der CYL-9 Keramikfliesenbohrkopf ist ein Standard-Bohrkopf zum Bohren in Fliesen. Der praktische Bohrkopf eignet sich für Trockenbohrungen ohne Kühlung. Das einfache Design ohne Kerben ist besonders geeignet für das Bohren in weichen bis mittelharten Fliesen. Bohren ohne Schlagfunktion bei niedrigen Geschwindigkeiten. Der Bohrkopf ist kompatibel mit Strom- und Akkubohrmaschinen mit zylindrischem Schaftsystem. Paket von 1 Stück.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The Bosch-developed carbide material combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 flutes and short, variable pitch significantly reduces flute friction and ensures efficient dust removal and less wear. The Bosch Power Grip shank system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone material. The drill bit head is PGM-certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and effective fastening. The drill bit head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package of 1 piece.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm