Easytop ball valve with SC-Contur. Pressure connection. With silicon bronze valve body according to DIN 50930-6 / DIN EN 1982, maintenance-free spindle, T-shaped handle with replaceable medium marking green/red, stainless steel ball, EPDM gaskets (press connection).

Bottom valve 1 1/2'' with plug. Chrome plated.

Universal valve with stainless steel valve upper part, with plug, plastic valve lower part, silver-coloured.

Long nipple- gunmetal- R-thread

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

T-Stück - Kupfer - Lötverbindung d1: 10, d2: 10, d3: 10

Verbindungsellbogen 22,5° - für WC - Kunststoffkomponenten - LippenabdichtungDN: 100, L: 150, Version: Alpinweiß

Screw fitting- gunmetal or silicon bronze- R-thread, Rp-thread- flat sealing, angled

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Screw fitting- gunmetal or silicon bronze- R-thread, Rp-thread- flat sealing, angled

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 34

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 20, d: 22

Easytop circulation regulation valve S/Ethermostatical regulation valve, with SC-Contur

Sanpress Inox Crossover mit SC-Contur- Stahl nicht korrodierend - Steckende, Pressanschlusskomponenten EPDM-Dichtelement d: 15

Sanpress Inox Verbindungsschraubfitting mit SC-Contur- Stahl nicht korrodierend - Pressverbindung, G-Gewinde - Flachdichtungskomponenten EPDM-Dichtelement, EPDM-Flachdichtung, Unionsmutter Schraubfitting d: 15, G: 12

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2218XL

Easytop Isolierschale - geeignet für Easytop Kugelhahn Modelle 2275, 2275.1, 2275.2, 2275.3, 2275.4, 2275.5, 2275.6 und den selbstverriegelnden Kugelhahn Modell5375 - Dicke der Isolationsschicht gemäß EnEV

Selbstsichernde Isolierschale für DN 15/20.

Armaturen mit Gewinden gemäß DINEN 10226, Teil 1, zertifiziert für Trinkwasser gemäß DIN 1988 und Gasinstallationen gemäß TRGI 2008 (beachten Sie die Hinweise zum Modell), getestet gemäß DVGW-Arbeitsblatt GW 6 und GW 393. Zertifikate: Rotguss-Gewindefittings - DVGW-Reg.-Nr. DV-7401AO2957 Gewindeverbindungen R-Außengewinde, vor Ort hergestellt - Hanf ohne Vergröberung des Gewindes ist möglich.

Geruchsfalle für Rohre - für Spüle - Kunststoff G: 112, L: 700, DN: 50

Verbindungsrohr - für WC - Kunststoffkomponenten - Lippenabdichtung DN: 100, L: 250, Version: Alpinweiß

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements, cutting ring, separator ringDN: 50, D: 2, d: 54

Viega 1115XL

Sanpress XL Adapter with SC-Contur- gunmetal- press connection, R-threadComponentsEPDM sealing element, cutting ringd: 88,9, R: 3