Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix Adapter Ellbogen 90° mit SC-Contur-Siliziumbronze-Presseanschluss, Rp-Gewinde: 16, Rp: 12

Raxofix Verbindungsschraubfitting mit SC-Contur für Verteiler aus Siliziumbronze mit Pressanschluss, Viega Steckplatz: 16, G: 34

Raxofix Adapter Ellbogen 90° mit SC-Contur-Siliciumbronze-Presseanschluss, Rp-Gewinde: 20, Rp: 34

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, Rp-Gewinde: 16, Rp: 12

Raxofix Adapterbogen 90° mit SC-Contur-Siliziumbronze-Presseanschluss, R-Gewinde: 16, R: 12

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, Rp-Gewinde: 32, Rp: 1

Raxofix-Kupplung mit SC-Contur-Siliziumbronze - Pressverbindung d1: 25, d2: 25

Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 16, R: 34

Raxofix Adapter mit SC-Contur für alle Viega-Metallsysteme - Siliziumbronze - PressverbindungenKomponentenEPDM-Dichtelementd1: 25, d2: 22

Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 20, R: 12

Raxofix-Steckstück mit SC-Contur für alle Viega-Metallsysteme, Siliziumbronze, Pressverbindung, Steckende d1: 20, d2: 18

Long nipple- gunmetal- R-thread

Langer Nippel in Waffengrau mit R-Gewinde. R: 1, L: 150 mm

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Geruchverschluss für Abflussrohr - für Spüle - Kunststoffkomponenten Ablaufbogen 45°, Abwasserschlauchanschluss Qualitätskontrolle gemäß DIN EN 274 G: 112, DN: 50

Geruchverschluss für Abflussrohr - für Spüle - Kunststoffkomponenten Flexibles Abflussrohr, Anschluss an Abwasserschlauch G: 112, L: 500, DN: 40/50

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Viega 1115

Viega 1115XL

Viega 1126.1

Viega 1115.5

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega 1112

Viega 1115.1