Soap shelf including grating and mounting set. Designed for insertion in tile joint or for mounting in an existing shower cubicle. For corner installation only – applies to both models.

ClassicLine Rost - Linie - Edelstahl, gebürstet: Anniversario, 700 mm. ClassicLine Anniversario ist ein Rost, der anlässlich des 10-jährigen Jubiläums von unidrain® im Jahr 2013 eingeführt wurde. Der Jubiläumsrost bringt den klassischen Rost näher an die exklusive HighLine-Serie und besteht aus gebürstetem Edelstahl, der zum Rahmen passt.

Rahmen Unidrain 1500 300X12 T/1005

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Unidrain-Ablaufeinheit Ø50 mm inkl. Wassersperre

Rist Unidrain klassisch mit einer Länge von 1601 und einer Breite von 800 mm.

ClassicLine Rost - Linie - Edelstahl, gebürstet: Anniversario, 900 mm. ClassicLine Anniversario ist ein Rost, der anlässlich des 10-jährigen Jubiläums von unidrain® im Jahr 2013 eingeführt wurde. Der Jubiläumsrost bringt den klassischen Rost näher an die exklusive HighLine-Serie und besteht aus gebürstetem Edelstahl, der zum Rahmen passt.

Outlet-Haus Unidrain Ø50 horizontal mit Wassersperre.

Ablaufgarnitur Unidrain 1001 800 mm.

Ablaufgarnitur Unidrain 1001 1000 mm.

Armatur Unidrain 1003 700 mm Ecke rechts.

Armatur Unidrain 1004 300 mm ohne Flansch.

Armatur Unidrain 1003 1000 mm Ecke rechts.

Armatur Unidrain 1003 900 mm Ecke rechts.

Rahmen Unidrain 1500 900X8 mm.

Rahmen-Unidrain 1500 900X12 T/1001.

Panel Unidrain Highline CUSTOM 1000

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Inkl. abnehmbarer Wasserfalle (kann getrennt und gereinigt werden). 180° umkehrbar, wenn ein rückwärtiger Auslass erforderlich ist.

Complete square drain set. Package includes HighLine Custom base 10×10 cm, steel drain unit, water trap, outlet unit Ø 75 mm horizontal with side inlets, 3 x adapters (2 pcs. for 40 mm pipes and 1 pc. for 32 mm pipe). The height of the unit can be adjusted +/- 10 mm and rotated 360° in the outlet unit. Special adhesive is included to glue your own tile to the Custom base. Hook and cleaning cloth included.

The fine towel hooks are screwed onto the wall and ensure that the towels hang firmly without falling down. Part of the Reframe Collection by Unidrain, a series of bathroom accessories with roots in Danish design. The series is available in brushed and hand-polished steel, as well as in PVD-treated copper, brass and black.

The fine towel hooks are screwed onto the wall and ensure that the towels hang firmly without falling down. Part of the Reframe Collection by Unidrain, a series of bathroom accessories with roots in Danish design. The series is available in brushed and hand-polished steel, as well as in PVD-treated copper, brass and black.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).