Unidrain - Seite 2

ClassicLine Rost - Linie - Edelstahl, gebürstet: Anniversario, 900 mm. ClassicLine Anniversario ist ein Rost, der anlässlich des 10-jährigen Jubiläums von unidrain® im Jahr 2013 eingeführt wurde. Der Jubiläumsrost bringt den klassischen Rost näher an die exklusive HighLine-Serie und besteht aus gebürstetem Edelstahl, der zum Rahmen passt.

Rist Unidrain Spalte 1602 misst 1200 mm.

Outlet-Haus Unidrain Ø75 vertikal mit Falle.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Outlet-Haus Unidrain Ø75 horizontal mit Wassersperre.

Rahmen Unidrain 1500 1200/12 mm.

Highline-Panel | Linie | komplett aus Edelstahl, gebürstet: 9

HighLine Farbpaneel Messing 900 mm. Komplett mit Panel, Füßen, Aufstiegen und Schrauben. Vor der Installation im Abflusskörper zusammenzubauen

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Outlet-Haus Unidrain Ø32 horizontal ohne Siphon.

Rist Unidrain Streifen mit einer Länge von 1605 und einer Breite von 700 mm.

Rahmen Unidrain 1500 300X12 T/1005

Rist Unidrain Spalte 1602 ist 900 mm.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

48041022 Montageset für Vinylabläufe für Holzbau

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Rahmen Unidrain 8 mm.

Water trap 50 mm water seal. Meets capacity and selfcleaning requirements according to EN 1253 (the panEuropean standard for floor drains) and is VA-approved. The water trap can be removed from the outlet unit and then dismantled for cleaning.

NOTE: Suitable only for outlet unit 1418.0050.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Inkl. abnehmbarer Wasserfalle (kann getrennt und gereinigt werden). 180° umkehrbar, wenn ein rückwärtiger Auslass erforderlich ist.

Unidrain-Ablaufeinheit Ø50 mm inkl. Wassersperre

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.