Ringke - Seite 7

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

A unique Ringke Fusion X case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Onyx Magnetic Magsafe series case from Ringke is made of soft and durable thermoplastic plastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

The Ringke Silicone Case combines stylish design with excellent protection. The slim case discreetly protects the headphones from scratches and damage without depriving them of their elegant appearance.

Made of very good quality materials that combine the flexibility of silicone with the strength of TPU. The case perfectly protects against dust, dirt and scratches that may arise as a result of everyday use. It maintains a slim profile without adding unnecessary volume, and the smooth, slightly matte surface is pleasant to the touch. The cover provides a great grip, so there is no question of the box accidentally slipping out of your hands.

The cover provides free access to the charging port as well as the LED. Thanks to its design and the materials used, it is compatible with wireless chargers. The set also includes a useful carabiner, allowing you to hang the cover anywhere, e.g. by the belt of a backpack, purse or trousers. Assembly and disassembly is quick and simple - both parts of the case are easy to disassemble, making it easy to remove the device from the case.

Ringke UX Magnetic is a versatile case that combines a sleek transparent design with advanced protective and utility features. The hybrid design uses flexible TPU combined with hard PC polycarbonate to provide comprehensive protection against bumps and scratches while maintaining the device's original look.

The built-in MagSafe-compatible magnetic ring allows wireless charging and stable attachment of magnetic accessories. The built-in kick stand acts as a comfortable stand, allowing you to place the phone in two positions - horizontal for watching content and vertical for video calls. The sturdy construction ensures stability and durability during daily use.

Raised edges around the screen and camera protect the most sensitive components from contact with flat surfaces. Precise cutouts give you full access to all features, and a solid finish allows you to enjoy the phone's design without compromising on protection.

Ringke Fusion is a hybrid case that combines solid protection with a minimalist design. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage. The lightweight design does not add unnecessary dimensions, while maintaining the slim profile of the device.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. Covering with two layers - antistatic to prevent dust collection and minimizing scratches - ensures a long-lasting aesthetic appearance.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

The Onyx series case from Ringke is made of soft and durable thermoplastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Protect your Smart Watch in class with the Ringke Onyx case! Made from durable PC and TPU materials, this hybrid case provides reliable protection against scratches, bumps, and daily wear and tear.

Thanks to Anti-Fingerprint technology, your watch always looks elegant, without greasy marks or streaks. The super-light and perfectly fitting case guarantees full access to all buttons, functions, and hardware, while maintaining a modern design that emphasizes the unique style of your Apple Watch.

Choose Ringke Onyx and enjoy protection and aesthetics at the highest level!

Ringke Fusion X is a rugged hybrid case that combines maximum protection with a distinctive design. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design. The lightweight design maintains the slim profile of the device while providing a secure and stable grip.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

Slim and lightweight overlays designed to fit perfectly. Ringke Slim is a stylish way to diversify and protect our Watch.

High-quality PC material protects against scratches and bumps.