Ringke Cover Display tempered glass is a high-quality screen protector that effectively protects the display from scratches, bumps and falls. Perfectly matched to the device's external screen, it offers unparalleled protection thanks to its 9H hardness. A special oleophobic coating guarantees smooth swiping on the screen and an immediate response to touch, which significantly improves the comfort of use.

Ringke Cover Display tempered glass consists of three layers: oleophobic coating, tempered glass and AB film, which increases its strength and functionality. The anti-aliasing technology used allows the screen protector to integrate naturally into the device, eliminating sharp edges and providing a sleek look.

Provide your device with the highest protection and enjoy its impeccable appearance with Ringke Cover Display tempered glass.

In addition, to ensure easy installation, an assembly tool is included in the kit, which makes the application of the glass simpler and more precise.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.

Ringke UX Magnetic is a versatile case that combines a sleek transparent design with advanced protective and utility features. The hybrid design uses flexible TPU combined with hard PC polycarbonate to provide comprehensive protection against bumps and scratches while maintaining the device's original look.

The built-in MagSafe-compatible magnetic ring allows wireless charging and stable attachment of magnetic accessories. The built-in kick stand acts as a comfortable stand, allowing you to place the phone in two positions - horizontal for watching content and vertical for video calls. The sturdy construction ensures stability and durability during daily use.

Raised edges around the screen and camera protect the most sensitive components from contact with flat surfaces. Precise cutouts give you full access to all features, and a solid finish allows you to enjoy the phone's design without compromising on protection.

The Ringke Fusion Bold Magnetic MagSafe is a hybrid case that combines solid protection with MagSafe functionality and a distinctive design. It stands out for its thickened bumper that contrasts with the transparent back to create a bold and modern look. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. Made of flexible TPU and hard polycarbonate, it provides effective protection against falls and scratches.

The high edges of the case effectively protect the display from potential scratches and damage, providing additional protection when in contact with flat surfaces. Raised edges around the camera protect the lens from scratches. Integrated button covers ensure full responsiveness without sacrificing sensitivity. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

The precise fit guarantees a perfect fit without slack. The characteristic thick bumper not only protects, but also distinguishes the phone from standard cases. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Fusion Magnetic MagSafe is a hybrid case that combines robust protection with MagSafe functionality. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. A built-in magnetic ring allows you to securely attach your MagSafe accessories. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick.

Ringke Camera Frame Protector is a set of single covers for all lenses of your smartphone's camera. Each of them receives its own tempered glass enclosed in an aluminum frame, which effectively protects against scratches and mechanical damage. Precise workmanship makes the installation of each cover quick and trouble-free, and a special mounting cap facilitates perfect positioning.

A specialized black print on the edges prevents reflections from flash or sunlight. The overlays are glued on the sides of each element, so they do not negatively affect the quality of the photos. The top of each of the lenses is covered with a special oleophobic coating, which does not leave fingerprints and is very easy to clean. Tempered glass with a hardness class of 9H effectively protects against scratches.

Despite the many layers, the covers remain low in thickness and do not protrude significantly above the camera housing. Thanks to their compact design, the overlays work with most cases with wide camera cutouts.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:

1. Start installation in the bathroom right after bathing – water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.Done! Enjoy a perfectly applied screen protector.

The unique Ringke Fusion Magsafe case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

Ringke Fusion Magsafe features a magnetic ring compatible with MagSafe wireless technology, providing a quick and easy connection to all MagSafe-enabled accessories.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.
All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Onyx series case from Ringke is made of soft and durable thermoplastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

Ringke Fusion Magnetic MagSafe is a hybrid case that combines robust protection with MagSafe functionality. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.

A unique case, the undoubted advantage of which is its small dimensions in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Ringke Fusion Magsafe features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.
All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Silicone Magsafe case from Ringke is made of soft and durable thermoplastic, which makes it ultralight thanks to its thin design. The case is a perfect fit and does not limit the possibility of wireless charging.

The Silicone is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

The case does not significantly enlarge the phone, but it makes it fit firmly and stably in the hand. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports.

Ideal for users who value high quality workmanship without having to increase the volume or weight of the device.

A unique Ringke Fusion case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Ringke Tempered Glass is a high-quality screen protector that combines reliable protection with a simple installation system. Precisely matched to the dimensions of the device, it provides long-term protection of the screen against scratches and mechanical damage in everyday use.

The glass is made of tempered glass with a hardness of 9H, which effectively protects the screen from bumps, drops and scratches. The oleophobic coating reduces fingerprints and stains, keeping the screen clean for a long time. The smooth, milled edges are pleasant to the touch and provide a comfortable glide of your finger along the edges of the screen, eliminating the unpleasant feeling of sharp edges.

The glass retains full clarity and natural touch sensitivity, without affecting everyday use and the responsiveness of the screen. The TG is designed to be case friendly, which means full compatibility with most protective enclosures available on the market.

A practical installation tool is included to make the installation process much easier. Thanks to this system, the installation of glass is fast, precise and trouble-free, eliminating the risk of air bubbles or displacement.

* Due to the various milling of the edges of the displays, after the installation of the protective glass on the screen, a slight air halo may form around the screen. This is a natural situation and depends on the screen itself.

A unique Ringke Fusion case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Onyx Magnetic Magsafe series case from Ringke is made of soft and durable thermoplastic plastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

Ringke Camera Frame Protector is a set of single covers for all lenses of your smartphone's camera. Each of them receives its own tempered glass enclosed in an aluminum frame, which effectively protects against scratches and mechanical damage. Precise workmanship makes the installation of each cover quick and trouble-free, and a special mounting cap facilitates perfect positioning.

A specialized black print on the edges prevents reflections from flash or sunlight. The overlays are glued on the sides of each element, so they do not negatively affect the quality of the photos. The top of each of the lenses is covered with a special oleophobic coating, which does not leave fingerprints and is very easy to clean. Tempered glass with a hardness class of 9H effectively protects against scratches.

Despite the many layers, the covers remain low in thickness and do not protrude significantly above the camera housing. Thanks to their compact design, the overlays work with most cases with wide camera cutouts.

The Ringke Fusion X Magnetic MagSafe is a rugged hybrid case that combines maximum protection with MagSafe functionality. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.

Ringke Fusion Magnetic MagSafe is a hybrid case that combines robust protection with MagSafe functionality. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.