Komponenten für Schaltkästen und Schränke - Seite 34

[7825200101]

.

Schalt-Lasttrennschalter VCD - TeSys - 3-polig - 690 V 32 A - abschließbarer roter Griff

Sicherungssockel Neozed D01 16A

Digitaler Zeitschalter mit wöchentlichem Programm. Die Programmierung erfolgt am Gerät. Kurzanleitung im Aufbewahrungsfach zur Installation auf TH35 DIN-Schienen gemäß EN 60715 Funktionen: 56 Speicherplätze für Ein-/Ausschaltzeiten, Schaltvorauswahl, Dauer-Ein-/Ausschaltung, manuelle Schaltung, Urlaubsprogramm, Umschalten Sommerzeit/Winterzeit: - automatisch aktivierbar/deaktivierbar; Umschaltrichtlinien für Europa, USA und andere Länder sind bereits gespeichert; benutzerdefinierte Umschaltrichtlinien oder das Umschalten an einem festen Datum können ausgewählt werden PIN-Codierung

Es tut mir leid, aber 'Pasring D01 2A' scheint kein gültiger Ausdruck oder Satz in irgendeiner Sprache zu sein. Können Sie bitte mehr Kontext oder Informationen bereitstellen?

[7825990217]

Interpact Leistungsschalter 4P

Dieser Acti9 iC60N ist ein Niederspannungs-Miniatur-Leitungsschutzschalter (MCB). Es handelt sich um einen 2P-Schutzschalter mit 2 geschützten Polen, einem Nennstrom von 4A und einer C-Auslösekurve. Er kann auf einer DIN-Schiene für eine modulare Installation montiert werden. Als Schutzschalter beträgt seine Auslösekapazität gemäß IEC/EN 60898-1 bei 400VAC 6000A. Als Schutzschalter beträgt seine Auslösekapazität gemäß IEC/EN 60947-2 bei 230VAC und bei 400VAC jeweils bis zu50kA. Dieser Miniatur-Leitungsschutzschalter schützt vor Kurzschluss- und Überlastströmen. Er hat einen IP20-Schutzgrad (gemäß IEC/EN60529) an seinen Anschlüssen, der sich in einem modularen Gehäuse mit Isolationsklasse II auf IP40 erhöht. Sein schneller Schließmechanismus verbessert die Lebensdauer des Geräts, während seine Begrenzungsklasse III (gemäß EN/IEC60898-1) den Kostenaufwand für den nachgeschalteten Leitungsschutz reduziert.Der einzigartige Visitrip-Anzeiger reduziert die Interventionszeit durch Anzeigen des fehlerhaften Stromkreises.Die Visisafe grüne Streifen garantieren das physische Öffnen der Kontakte zur Durchführung von Wartungsarbeiten stromlos zu machen. Dieser doppelte Terminal-Miniatur-Leitungsschutzschalter spiegelt die Schneider Electric-Expertise wider, die seit mehr als 40 Jahren modulare Geräte für den Schutz elektrischer Stromkreise in allen Anwendungen entwickelt. Er hat eine längere Lebensdauer dank seiner hohen Begrenzung und schnellen Schließung. Dieses Produkt entspricht sowohl IEC 60898-1 als auch IEC 60947-2, verfügt über IP20B-fingersichere Anschlüsse mit doppelter Anzugskraft im Vergleich zum Standard und ist auf einer DIN-Schiene montierbar.Es bietet VisiTripTM für Sicherheit während der Wartung und VisiSafeTM zur Reduzierung der Interventionszeit an.

iC60N - Leitungsschutzschalter - 1P - 10A - C-Kurve

This is a 4 poles basic frame for ComPacT NSX160F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160F is part of Schneider Electric EcoStruxure Power architecture.

Siemens Lasttrennschalter 3LD, Hauptschalter

This is a 3 poles basic frame for ComPacT NSX100N. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit ordered separately. The breaking capacity Icu is 50kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX100N is part of Schneider Electric EcoStruxure Power architecture.

Bildschirmschutz für Handy, durchsichtig, für Samsung Galaxy S, S Plus

This MicroLogic 2.2 is a 3 poles 3d electronic trip unit used on ComPacT NSX 100/160/250 circuit breakers. This 100A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

Schneider Electric RUZC3M Leistungsrelais Schwarz

This is a 3 poles basic frame for ComPacT NSX400F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 255mm x 110mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX400F is part of Schneider Electric EcoStruxure Power architecture.

This Acti9 electrical auxiliary is a modular OC contact used as remote indication ot the position of the associated device. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 1 position switch with contacts type 1 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA and iC60 RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. The iOF is either used for device short name or compatibility code. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product colour is white (RAL 9003). The pollution degree is 3. The level of tropicalisation is treatment 2. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type. According to IEC 60529 sta

This MicroLogic 2.2 is a 4 poles 4d electronic trip unit used on ComPacT NSX 250 circuit breakers. This 250A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

Schneider Electric 18656 Stromunterbrecher Typ C 4

Schneider Electric A9F04463 Stromunterbrecher 4

TeSys GV4 stands out by being both compact and high performance. The device is intended for mounting on DIN rail and is only 81 millimeters wide. Nevertheless, the rated current rises up to 115A and has three breaking levels of 25, 50 or 100 kA.In addition, TeSys GV4 offers both operating classification 10 (normal start) and 20 (heavy start). This makes it the obvious choice for a multitude of different applications, regardless of the specifics of the individual application.TeSys GV4 is also perfect for machines that need to be exported to customers outside of Denmark. It is therefore certified according to all relevant international standards (UL, JIS, ATAX, CCC, EAC and EU) and therefore approved for use worldwide, including North America and Asia.The motor switch can be used both as a main circuit breaker in a control panel and as an individual protection in front of motors. The smart connection with EverLink terminals ensures that the TeSys GV4 cables are always properly tensioned, even with vibration or motion in the cables.Three types• GV4L: Magnetic switch• GV4P: Thermomagnetic switch with overload setting.• GV4PEM: Thermomagnetic switch with overload setting and advanced protection and alarm Many options - wide application• Only one physical size: 81 mm wide, mounted on DIN rail• Rated current up to 115A, 3P (choose 2, 3, 5, 7, 12, 25, 50, 80 or 115A) up to 55kW (400VAC)• Three levels of break power: 25, 50 or 100 kA (415V)• Dual operation classification: 10 (normal start) and 20 (heavy start)

Schneider Electric iC40N Stromunterbrecher 3P

This is a 3 poles basic frame for ComPacT NSX160N. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 50kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160N is part of Schneider Electric EcoStruxure Power architecture.

Schneider Electric C60BP Stromunterbrecher 2P