Komponenten für Schaltkästen und Schränke - Seite 17

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Griffknopf. Direkte Montage am Schalter, kein Schaft erforderlich. Abschließbar in der Aus-Position. Schwarz, 40 mm. Passend für OT16...125F3/F4 und OT16...40F6/F8

Schneider Electric LC1D38B7 Hilfskontakt

Überstromschalter, 13A, 1p, Typ C Charakteristik

Miniatur-Steckrelais - Zelio RXM - 2 Wechsler - 24 V AC - 12 A - mit LED

Power supply 90-265VAC / 24VDC, 1,5A-36W

The RXG interface relay range comprises: 10 A relays with 1C/O contact and 5 A relays with 2C/O contacts. Sockets with separate contact terminals, screw connector connection and built-in plastic maintaining clamp, 35mm DIN rail mounting and Panel mounti

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 4P circuit-breaker with 4 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

TeSys D Thermische Überlastrelais - 0,25...0,4 A - Klasse 10A

DC power supply LF48-2DC 24VDC Product description: Robust and compact 1-phase power supplies without RC filter for 12 or 24V DC with max. 48% ripple RMS. Constructed and produced according to EN61558-2-6 and CE marked. Plastic encapsulated and cast in self-extinguishing polyurethane. Insulation class II - double insulated. The power supplies are...

Monitoring Relays AC CURRENT RELAY REV.5

Die RCCBs F200 Serie sorgt dafür, dass Menschen und Installationen gegen Fehlerströme zur Erde geschützt sind. Ein großes Angebot an Standard-Sofort- und Selektiv-AC- und A-Typen wird durch einige Konfigurationen für spezielle Anwendungen ergänzt.

MS116-4.0 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 4.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Shaft for selector type handle.

TeSys GV3-Schutzschalter-thermisch-magnetisch - 37...50A - EverLink BTR-Anschlüsse

TeSys D - Zeitverzögerter Hilfskontaktblock - 1NO + 1NC - Schraubklemmen

iC60N - Mini-Leitungsschutzschalter - 3P - 13A - C-Kurve

iC60N - Leitungsschutzschalter - 1P - 0,5A - C-Kurve

PFI relay 63A 3P+N 30mA Type B

Residual current circuit breaker (RCCB), 63A, 4p, 30mA, type A

Überstromschalter, 10A, 3polig+N, Typ C Charakteristik

Humfree contactor 40A 4NO 230V Humfree for the control of circuitsGuarenteed silence during the entire life of the productCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 4 / 25mm2 Connection cross-sect. flexible cable: 4 / 16mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 3According to standard: EN 61095

TeSys enclosed starters accessory, emergency stop pushbutton. Mushroom head stop pushbutton, Ø 40 mm, red, with latching position and release by turning, supplied with an IP55 sealing kit GV2E01. To be mounted on empty enclosures LE1GVMEK, GV2MP, GV2MC (except GV2MCK04 already equipped) for use with thermal magnetic circuit breakers GV2ME (to be ordered sparately). Green Premium compliant (RoHS/REACh).

TeSys K - Hilfskontaktblock - 4 NC - Schraubklemmenanschlüsse

impulse relay iTLI - 2P - 1NO+1NC - 16A - coil 110 VDC - 230...240 VAC 50/60Hz