Handkreissäge - Seite 16

Kreissägeblatt, für Holz, Metall, Aluminium, 150 mm, 33 Zähne, für Makita DCS553, DCS553RTJ; LXT DCS553Z

Schneidscheibe, für Metall, 125 mm

Kreissägeblatt, für Holz, 190 mm, 12 Zähne

Kreissägeblatt, für Holz, 165 mm, 40 Zähne

Kreissägeblatt, für Holz, 190 mm, 60 Zähne

Kreissägeblatt, für Holz, 190 mm, 24 Zähne

Kreissägeblatt, für Laminat, 136 mm, 48 Zähne

DEWALT Brushless Motor for extended run-time, reliability & durabilityElectronic module with battery pack identification for increased power and productivityExtremely durable tool design, including a cast aluminum base for repetitive, accurate cuts

Schneidscheibe, für Edelstahl, 125 mm, Körnung: A60T, für Makita GA041GM201; XGT GA041GZ

Tischsäge, 1800 W

Bosch ‎2608642607 Kreissägeblatt 10 cm 1 Stück(e)

Bosch ‎2608642608 Kreissägeblatt 12,5 cm 1 Stück(e)

Scheibennutfräser, für Holz, 100 mm, 6 Zähne, für P/N: DPJ180ZJ

Kreissägeblatt, für Holz, 165 mm, 24 Zähne

Microteq teeth (produced internally) made of high-density carbide combined with a robust tooth shape that is ideal for universal use. Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which have an ATB (alternate top bevel) tooth geometry: When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with plunge saws, handheld saws, multi-cutters, miter saws, compound miter saws and table saws as well as horizontal/vertical radial arm saws

The Expert for Aluminum circular saw blade has an HLTCG tooth shape (High-Low Triple Chip Ground) that gives the blade strength for cutting aluminum. The Expert for Aluminum circular saw blade delivers perfect cuts in aluminum. The special, extra-hard Microteq teeth, produced internally by Bosch, are made of very fine carbide grains that give the blade maximum life and cutting ability. The strength is further reinforced by the blade's Proteqtion coating, which prevents corrosion and ensures reliable cutting performance with reduced friction. In addition, the product is equipped with anti-vibration holes to ensure high cut quality and significantly reduce vibration and noise levels. This saw blade is used for aluminum, non-ferrous metals, plastic, epoxy and wood.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. Its high-quality precision-ground carbide teeth make the blade strong enough for fast cutting, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. It is compatible with handheld saws and table saws.

Circular saw blade, for wood, 230 mm, 36 teeth

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade has a high number of teeth, it provides clean cuts whereas a low number of teeth gives powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The HLTCG tooth shape (High-Low Triple Chip Ground) gives the Expert for Multi Material circular saw blade strength to work with abrasive materials. The Multi Material circular saw blade provides powerful cuts in a wide range of materials. Its precision-ground high-quality carbide teeth make the blade strong enough to cut through many different materials, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in non-ferrous metals, aluminum, plastic, epoxy and wood.

Die Speedline Wood Kreissägeblatt bietet präzise Längs- und Querschnittsschnitte in allen Arten von Holz. Seine hochwertigen, präzisionsgeschliffenen Hartmetallzähne machen das Blatt stark genug für schnelles Schneiden, während sein Kernblatt aus dimensionsstabilem SK5 gehärtetem Stahl (> 40 HRC) für Genauigkeit sorgt. Gleichzeitig reduzieren die Ausdehnungsschlitze des Blatts Vibrationen während des Gebrauchs, was eine geräuschreduzierende Wirkung hat und die Wärmeentwicklung verringert. Dieses Sägeblatt eignet sich für den Einsatz mit allen Arten von Holz und Holzwerkstoffen. Das Speedline Wood Kreissägeblatt bietet präzise Längs- und Querschnittsschnitte in allen Arten von Holz. Es ist kompatibel mit Handkreissägen und Tischkreissägen.

The HLTCG tooth shape (High-Low Triple Chip Ground) gives the Expert for Multi Material circular saw blade strength to work with abrasive materials. The Multi Material circular saw blade provides powerful cuts in a wide range of materials. Its precision-ground high-quality carbide teeth make the blade strong enough to cut through many different materials, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in non-ferrous metals, aluminum, plastic, epoxy and wood.