Handkreissäge - Seite 14

Bosch ‎2608642609 Kreissägeblatt 12,5 cm 1 Stück(e)

Bosch ‎2608644138 Kreissägeblatt 18,4 cm 1 Stück(e)

Bosch ‎2608644357 Kreissägeblatt 1 Stück(e)

Kreissägeblatt, für Holz, 184 mm, 48 Zähne

Top Precision Best for Laminated Panel scoring blade delivers precision in industrial quality for highly demanding tasks in laminate panels coated on one or both sides. The good cutting ability and quality are further enhanced by the blade's special, extra-hard Microteq teeth, which are internally manufactured by Bosch and consist of durable carbide grains. In addition, the blade's Cleanteq coating prevents adhesion of residues such as glue and resin while ensuring extra clean results, while also preventing corrosion and keeping the blade cool. The adjustable scoring blade is intended for chipboard, sheet materials, and veneered laminates. Top Precision Best for Laminated Panel scoring blades have an ATB tooth geometry (Alternate Top Bevel) that provides clean cuts in all types of wood material and laminate panels. It is compatible with horizontal and vertical radial saws.

Akku-Handkreissäge bietet mobiles 18V-Sägen mit Ø150 mm Sägeblatt, werkzeuglosen Tiefen- und Gehrungseinstellungen, LED-Arbeitslicht und Staubabsaugadapter.

Einhell TE-CS 18/150 Li cordless circular saw ist Teil der Power X-Change Familie und nutzt einen 18V Akku (1.5 Ah oder mehr) für flexibles, kabelloses Arbeiten unterwegs. Eine Spindelarretierung erleichtert den Blattwechsel, und die Kompatibilität mit der Einhell Führungsschiene (separat erhältlich) unterstützt geführte Schnitte.

• Power X-Change Systemkompatibilität (Akku passt in 200+ Maschinen)
• Werkzeuglose Einstellung von Schnitttiefe und Gehrungswinkel
• Hochwertiges LED-Arbeitslicht für den Schnittbereich
• Staubabsauganschluss hilft, den Arbeitsbereich sauberer zu halten
• Spindelarretierung für einfachen Sägeblattwechsel
• Leerlaufdrehzahl: 4.200 rpm
• Schnitttiefe: 48 mm bei 90° / 32 mm bei 45°

Ausgelegt, um klein, leicht und handlich zu sein – für komfortables Schneiden ohne eine nahe Stromquelle.

DEWALT Brushless Motor for extended run-time, reliability & durability. General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials. Guide rail compatible for quick and easy use with the DEWALT guide rail system. Variable adjustment of the bevel angle to 57 degrees. Optimum balance for safe, fatigue-free operation. Stable block construction for low vibration running and long service life. Additional handle for safe two-handed work. Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose. Dust blower clears dust and debris from cut line. LED work light for improved cut line visibility. Scale for precision cutting depth to 58mm (54mm when used with a Guide Rail)

Kreissägeblatt, für Aluminium, 136 mm, 50 Zähne

Kreissägeblatt für abrasive Materialien, Hochdruck-Schichtstoffplatten (HPL), 190 mm, 56 Zähne

Kreissägeblatt für Holz, 254 mm, 22 Zähne

Microteq teeth (produced internally) made of high-density carbide combined with a robust tooth shape, which is ideal for universal use. Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which have a tooth geometry with ATB (alternate top bevel): When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with plunge saws, handheld saws, multi-cutters, miter saws, compound miter saws and table saws as well as horizontal/vertical radial arm saws

Circular saw blade, for stainless steel, 355 mm, 90 teeth

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade has a high number of teeth, it provides clean cuts whereas a low number of teeth gives powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

Microteq teeth (produced internally) made of high-density carbide combined with a robust tooth shape, which is ideal for universal use. Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which have a tooth geometry with ATB (alternate top bevel): When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with plunge saws, handheld saws, multi-cutters, miter saws, compound miter saws and table saws as well as horizontal/vertical radial arm saws

The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. Its high-quality precision-ground carbide teeth make the blade strong enough for fast cutting, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which reduces noise and heat development. This saw blade is suitable for use with all types of wood and wood materials. The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. It is compatible with handheld saws and table circular saws.

The Expert for Aluminum circular saw blade has an HLTCG tooth shape (High-Low Triple Chip Ground) that gives the blade strength for cutting aluminum. The Expert for Aluminum circular saw blade delivers perfect cuts in aluminum. The special, extra-hard Microteq teeth, produced internally by Bosch, are made of very fine carbide grains that give the blade maximum life and cutting ability. The strength is further reinforced by the blade's Proteqtion coating, which prevents corrosion and ensures reliable cutting performance with reduced friction. In addition, the product is equipped with anti-vibration holes to ensure high cut quality and significantly reduce vibration and noise levels. This saw blade is used for aluminum, non-ferrous metals, plastic, epoxy and wood.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade has a high number of teeth, it provides clean cuts whereas a low number of teeth gives powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The Optiline Wood circular saw blade cuts all types of wood precisely and with high quality

Disc blade made of stable dimensions SK5 hardened steel (> 40 HRC) ensures precision
Expansion cuts reduce vibration during cutting, reducing noise and heat dissipation
Optiline Wood circular saw blades have ATB geometry teeth: high number of teeth - clean result, low number of teeth - efficient cutting
Depending on the number of teeth, all Optiline Wood circular saw blades with ATB (opposite upper bevel) geometry give different results: when the number of teeth is large, the disc cuts clean, and when the number of teeth is small, it ensures a firm and productive cut.

It is suitable for table saws.

Kreissägeblatt

Kreissägeblatt für Holz mit Nägeln, Konstruktionsholz, 160 mm, 12 Zähne

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.