Fußbodenheizung - Seite 9

Sparepart for Roth shunt

1" x 3/4" extension kit for Salus GVM manifold.

Used between floorheating pipe and Roth manifold.

Used on Roth manifold

Used for floorheating systems

Used between floorheating pipe and Roth manifold.

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset. Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung sowie Einstellring zum Ausgleich ohne Werkzeug. Vorbereitete Stellen für Raumnamensschilder und Rücklauf mit Ventilen und Kappen vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich). Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen1025659 ,1042836 Schleifenteilung50 mm Kopfteilung225 mm Maximaldruck:6 bar Maximale Temperatur:60°C Material:Fiberglas-verstärktes Polyamid

Schlüssel zum Festziehen von Muttern. Für Art. 3015, 3625, BI-219 und BI-220.

Temperatursensor Uponor 20-55°C

Erweiterung für 1" Verteiler, 2 Kreisläufe. 1" Verteiler, Zulauf- und Rücklaufleiste inklusive Kupplung. Inklusive 20/16 Anschlüssen.

Linear manifold 1x3/4/18 with incorporated lockshield valve

Erweiterung bis Midishunt, 2 Kreisläufe, 3/4 Verteiler, Zulauf- und Rücklaufleiste inklusive 20/16 Anschlüssen

Brass end coupling male x female x female. For linear manifolds series 7000PM, 7035M, 7035TEM and 7035DM. Yellow.

Uponor fix clamp track strip with pins 17-20mm c/c100mm 0,6m

Kabelloses Raumthermostat in Schwarz mit Display und integrierter Messung der relativen Luftfeuchtigkeit.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

DEVIpipeheat 10 V3, 22m Self limiting with Danish plug

DEVIpipeheat 10 V3, 14m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Energie sparender Thermo-Elektrischer Stellantrieb 1W, 230V, mit Adapter.

Roth drahtlose Regelung für Minishunt, Typ Plus

Salus Shunt GVS is equipped with a full electronic circulation pump, with a capacity for supplying 1 - 16 floor heating circuits.

Danfoss Durchflussthermostat Typ FH-TC für kompakte Fußbodenheizkreisverteiler mit selbstaktivierender thermostatischer Steuerung.

Used for floorheating systems