Fußbodenheizung - Seite 8

Roth Touchline Standard-Raumthermostat wird für Roth Touchline Steuereinheiten verwendet.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

DEVIpipeheat 10 V3, 6m Self limiting with Danish plug

Amplifier for Salus iT600 heating system ZigBee signal.

Heat shrink kit connection and end seal JLP for cold cable connection to ETL-10 self.reg. cable

Komplettes drahtloses Steuerungskit zur Steuerung der Heizung in kleinen Räumen bis max. 8 m2. Besteht aus einer 1-Zonen-Steuerungseinheit, einem analogen Raumthermostat, einem Aktuator und einem 1/2 Heizkörperventil, 230V.

Pettinaroli DIRECT - verkabeltes Steuerungssystem für Fußbodenheizung. 6 Zonen. 24V

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Tesa-, Frese-, Honeywell-, Cazzaniga- und Wavin-Verteiler

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset. Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung sowie Einstellring zum Ausgleich ohne Werkzeug. Vorbereitete Stellen für Raumnamensschilder und Rücklauf mit Ventilen und Kappen. Vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich), Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen1025659 ,1042836 Schleifenteilung50 mm Kopfteilung225 mm Maximaldruck:6 bar Maximale Temperatur:60°C Material:Fiberglas-verstärktes Polyamid

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Komplettes drahtloses Steuerungskit zur Steuerung der Heizung in kleinen Räumen bis max. 8 m2. Besteht aus einer 1-Zonen-Steuerungseinheit, einem analogen Raumthermostat und einem Aktuator, 230V.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Danfoss RAV/FJVR Ventilen.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Used for floorheating systems

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 5 Auslässe.

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 3 Auslässe.

Parallel shunt incl. UPM3 pump 15/70.

Komplettes Anpassungsset aus Messinglegierung für Polyethylenrohre. Gelb

Vormontierte lineare Verteiler mit eingebautem Absperrventil. Mikrometrische Regulierung. Kompressionsenden. Ohne Armaturen. Gelb. 3 Ausgänge.

Valve for k7037 - return - complete

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 2 Auslässe.

Ventileinsatz für Thermostatventil