Danfoss Fußbodenheizung - Seite 3

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Der Drehknopf-Thermostat ist ein kostengünstiger Raumthermostat mit einfacher Bedienung und allen fortschrittlichen Funktionen des Danfoss Icon Fußbodenheizungssystems. Kabellos, 3 Jahre Batterielebensdauer, Option zur Begrenzung des Temperaturbereichs, 2 Stück AA-Batterien.

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss ABNM A5 thermic actuator. Danfoss ABN A5 (On/Off, 24/120/230V) and ABNM A5 LIN/LOG (0-10V, 24V AC and DC) are thermic actuators for AB-QM DN10-32 with 5 mm/6.5 mm stroke, plug-in cable and IP54 available as NC and NO.

Kabel für ABNM A5, 1 Meter, halogenfrei (0-10V). MERKE DIR 406848800 UND 460947976

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 12m Self limiting with Danish plug

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

DEVIpipeheat 10 V3, 4m Self limiting with Danish plug

DEVIpipeheat 10 V3, 14m Self limiting with Danish plug

DEVIpipeheat 10 V3, 19m Self limiting with Danish plug

DEVIpipeheat 10 V3, 22m Self limiting with Danish plug

Danfoss Icon2 Antenne

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss 088H3120 Sanitärarmatur

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Für diejenigen, die kühlen möchten und Kondensation vermeiden wollen.

Für diejenigen, die eine bedarfsgesteuerte Versorgungstemperatur verwenden möchten. Enthält einen thermischen Stellantrieb und ist IP54 geschützt gegen Staub und Spritzwasser

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

Danfoss TWA-V thermal actuator 230V NC. The thermal actuator TWA-V range is used with electrical on/off-controls to activate several types of Danfoss valves with RAV and VMT/8 connection. The actuator is equipped with a visual position indicator to show t

Die Danfoss BasicPlus und BasicPlus2 Raumthermostate sind als eigenständige Thermostate konzipiert, die direkt an einen 230V-Aktor angeschlossen werden können. Die Thermostate sind in Ausführungen mit Drehknopf, Display und programmierbarem Display erhältlich.

For those who want to extend the wireless signal range.

Für diejenigen, die hochentwickelte Steuerungsoptionen wünschen, einschließlich Kühlbetrieb und Versorgungstemperatursteuerung. Eigenschaften Erweiterungsmodul • Erforderliches Modul • Sendet und empfängt drahtlose Signale zwischen Raumthermostaten und Master-Controller