Danfoss Fußbodenheizung - Seite 2

Danfoss 088U2121 Thermostat ZigBee Weiß

Danfoss ABNM A5 thermic actuator. Danfoss ABN A5 (On/Off, 24/120/230V) and ABNM A5 LIN/LOG (0-10V, 24V AC and DC) are thermic actuators for AB-QM DN10-32 with 5 mm/6.5 mm stroke, plug-in cable and IP54 available as NC and NO.

Für diejenigen, die die gewünschte Temperatur einstellen, die aktuelle Temperatur sehen und die Bodenoberflächentemperatur kontrollieren möchten. Funktionen drahtloser Display-Thermostate • Infrarot-Boden-Temperatursensor • Temperaturbereichsbegrenzung • Drahtlose 2-Wege-Kommunikation • Touchscreen-Steuerung • Symbolbasierte Navigation • Geräuschloses Schalten• Batteriebetrieben (2 x 1,5V)

Danfoss FHV-R. Der selbsttätige Fußbodenheizungstemperaturbegrenzungsventil FHV-R bietet eine Temperaturregelung von Fußbodenheizkreisen unter Verwendung des Rücklauftemperaturbegrenzers FJVR. Das Ventil ist so konzipiert, dass es in eine massive oder Trennwand eingebaut werden kann und nur den Raumbedarf des Rohrleitungsanschlusses benötigt

Danfoss IconTM Zigbee-Modul, 24V/drahtlos. Wird verwendet, um den Danfoss Icon-Master-Controller (088U1141 oder 088U1142) mit dem Zigbee 3.0-Netzwerk zu verbinden und kann somit über das Danfoss Ally Gateway oder ein Drittanbieter-Zigbee 3.0-kompatibles Gateway gesteuert werden.

Danfoss TWA-V thermal actuator 230V NC. The thermal actuator TWA-V range is used with electrical on/off-controls to activate several types of Danfoss valves with RAV and VMT/8 connection. The actuator is equipped with a visual position indicator to show t

Für diejenigen, die eine bedarfsgesteuerte Versorgungstemperatur verwenden möchten. Enthält einen thermischen Stellantrieb und ist IP54 geschützt gegen Staub und Spritzwasser

Danfoss-Kompressionsarmaturen. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Sammelrohr CFD.

Danfoss FHM-C2 prefabricated floor heating shunt for regulating the flow temperature in water-borne floor heating systems. With Danfoss Icon floor heating control and expansion module, the flow temperature can be regulated electronically according to the heating requirement in the home.

Danfoss-Verbindungselemente. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15 und Sammelrohr CFD.

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Erforderliches Modul für diejenigen, die ein drahtloses System haben möchten. Funktionen des Radio-Moduls: • Erforderliches Modul • Sendet und empfängt drahtlose Signale zwischen Raumthermostaten und Master Controller

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss Endstück - Endstücke, Halterungen und andere Zubehörteile für die FHF-Verteilerserie. Endstück mit manuellem Entlüftungsventil

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Devi fitting

Danfoss Fußbodenheizung FHF-E. Endstücke, Halterungen und andere Zubehörteile für die FHF-Verteilerserie. Endkappe.

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Endstück - Endstücke, Halterungen und andere Zubehörteile für die FHF-Verteilerserie. Endstück mit automatischem Entlüfter.

DEVIpipeheat 10 V3, 16m Self limiting with Danish plug