Entwässerungsprodukte - Seite 29

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Eine weiße runde Platte mit einem Durchmesser von 150 mm.

Membrane JO

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Geberit PE Abzweigstück 45°: 125/63mm

Mit Überwurfmutter: d40mm G1 1/2 weiß alpin

Wastewater pipesystem GM-X galvanized DN 70x1000 mm

Abflussgarnitur Unidrain 1001, 1200 mm.

For shower cubicles with open left-hand side, glass screen or similar.

The drain unit has two wall flanges.

Fixture Unidrain 1004 1200 mm ohne Flansch.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Complete floor drain against rear wall 900 mm, 10 mm frame, Column grate, 75 mm vertical outlet housing