Entwässerungsprodukte - Seite 13

Sanit Abflussfalle für Waschmaschine/Geschirrspüler 40 mm mit Chrombogen

Can be freely positioned against the back wall, independent of any side walls.

The drain unit has one wall flange.

VR-Kupplungen für Gusseisenrohre, Abwasseranwendungen. Gehäuse aus Chrom-Nickel-Stahl. Gummi aus SBR. Nicht für Drucksysteme geeignet. Maximaltemperatur 80°. Nicht zur Installation im Boden geeignet.

Unidrain Holzrost für Eckmontagen.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

AMAX Pro ist ein Abfluss in PP für Entwässerungssysteme in Gebäuden zur Abführung von Abwasser.

dBlue ist ein Abflussrohr aus PP (Polypropylen) in 3 Schichten. Es eignet sich für die Installation an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohrsystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schallschutz gestellt werden, empfehlen wir FRIAPHON.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Purus Line package 800 is a complete drain channel with a 50 mm low horizontal outlet for installation in concrete and is suitable for 8 - 10 and 12 mm tiles using the included extension strips. The drain channel is equipped with a removable water trap, stainless steel frame and grate Rib. The drain channel can be installed against 1, 2 or 3 walls.

Rahmen/Gitter Jo-flex 141 mm Edelstahl.

Geruchsverschluss für das Waschbecken aus Kunststoffkomponenten, Abflussbogen 45°, Anschluss für Abwasserschlauch G: 112, DN: 50

Schlauchverschraubung 45° für 2 Abwasserschlauchanschlüsse. Material: weißer Kunststoff

Outlet-Einheit | Leitung | Ø 50 mm horizontal, inkl. Siphon

Pipe odour trap - for sink - plastic Components Drain elbow 45°, 2 waste water hose connection Quality controlled in accordance with DIN EN 274

Stücke aus PEH zum Schweißen werden für Abwasserinstallationen verwendet. Mit TPE-Schalldämpfung.

For non-ventilated flat-roof structures with insulation thicknesses 14 cm

Geberit PE bend: 88.5°, d=50mm

Wastewater pipe system GM-X galvanized DN 50x1000 mm

Stücke aus PEH zum Schweißen werden für Abwasserinstallationen verwendet. Mit TPE-Schalldämpfung.

Geberit PE Reduzierstück, exzentrisch, kurz: d=63mm, d1=56mm

AMAX Pro ist ein Abfluss in PP für Entwässerungssysteme in Gebäuden zur Abführung von Abwasser.

Stücke aus PEH zum Schweißen werden für Abwasserinstallationen verwendet. Mit TPE-Schalldämpfung.

Geberit PE Reduzierstück, exzentrisch, kurz: d=110mm, d1=50mm