Entwässerungsprodukte - Seite 12

Wafix Silikon-Schmiermittel in Tube mit 50 Gramm.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Complete floor drain against rear wall 800 mm, 10 mm frame, Column grate, 75 mm vertical outlet housing

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Water trap 50 mm water seal. Meets capacity and selfcleaning requirements according to EN 1253 (the panEuropean standard for floor drains) and is VA-approved. The water trap can be removed from the outlet unit and then dismantled for cleaning.

NOTE: Suitable only for outlet unit 1418.0050.

Fixture Unidrain 1004 1200 mm ohne Flansch.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

dBlue ist ein Abflussrohr aus PP (Polypropylen) in 3 Schichten. Es eignet sich für die Installation an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohrsystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schallschutz gestellt werden, empfehlen wir FRIAPHON.

Rist Unidrain Klassiker mit einer Länge von 700mm.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Rahmen Unidrain 1500 1200/8 mm. (This is already in informal German)

.

Inklusive abnehmbarem Wasserfänger (kann getrennt und gereinigt werden). 180° umkehrbar, wenn ein rückwärtiger Auslass benötigt wird.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Drain bowl minimax low model 50 mm.

dBlue ist ein Abflussrohr aus PP (Polypropylen) in 3 Schichten. Es eignet sich für die Installation an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohrsystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schall gestellt werden, empfehlen wir FRIAPHON.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

FRIAPHON® ist ein schalldämmendes Abwassersystem aus Kunststoff, das den hohen Anforderungen moderner Entwässerungssysteme entspricht. Das System wird für normale Abwässer verwendet und erfüllt die strengen Anforderungen an Feuer- und Schallschutz.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Sanit Abflussfalle für Waschmaschine/Geschirrspüler 40 mm mit Chrombogen

AMAX Pro ist ein Abfluss in PP für Entwässerungssysteme in Gebäuden zur Abführung von Abwasser.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Can be freely positioned against the back wall, independent of any side walls.

The drain unit has one wall flange.