Unidrain Entwässerungsprodukte - Seite 6

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Rist Unidrain Streifen mit einer Länge von 1200 mm und Modellnummer 1605.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Complete square drain set. Package includes HighLine Custom base 10×10 cm, steel drain unit, flow guide, water trap, outlet unit Ø 110 mm horizontal with side inlets, 3 x adapters (2 pcs. for 40 mm pipes and 1 pc. for 32 mm pipe). The height of the unit can be adjusted +/- 10 mm and rotated 360° in the outlet unit. Special adhesive is included to glue your own tile to the custom base. Hook and cleaning cloth included.

Highline-Panel | Linie | komplett aus Edelstahl, gebürstet: 9

Rist Unidrain Spalte 1602 ist 700 mm.

Rist Unidrain-Säule mit Abmessungen von 1602 x 800 mm.

Unidrain Highline CUSTOM 800 Panel

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Die Auslassgehäuse haben eine besonders niedrige Installationshöhe und können möglicherweise mit der VA-zugelassenen Geruchsbarriere kombiniert werden. Eine Verriegelungshalterung stellt sicher, dass das Auslassgehäuse immer in der richtigen Position am Abflussanschluss befestigt ist, und ein Paar Füße am Boden des Auslassgehäuses ermöglicht die Befestigung an der Basis.

Outlet-Haus Unidrain vertikal EX-Falle Ø75.

Großer Unidrain Classic 1601 mit einer Länge von 900 mm.

Eckmontage Unidrain 2011.

Outlet-Haus Unidrain vertikal EX-Falle Ø50.

Outlet-Einheit | Leitung | Ø 75 mm vertikal, inkl. Wassersperre

Removable water trap. Can be dismantled for cleaning.

Montageprofil für 1004.1000 mit einer Dicke von 22 mm.

Inklusive abnehmbarem Wasserfänger (kann getrennt und gereinigt werden). 180° umkehrbar, wenn ein rückwärtiger Auslass benötigt wird.

Rahmen Unidrain 1500 1200/8 mm. (This is already in informal German)